How to remove and replace the differential carrier on Toyota Sienna?

You must first put on the plate washer before tightening the rear differential side gear shaft bolt for the differential carrier replacement or removal process. Follow by installing the rear drive shaft assembly LH as the second step and proceed with the rear axle shaft nut LH installation afterward and the third step includes the rear speed sensor LH. The installer should start positioning the exhaust pipe components. You should mount the rear wheel and tighten it to 103 Nm (1,050 kgf-cm, 76 ft-lbf). To complete the installation check for exhaust gas leaks while you also conduct inspections of the rear wheel alignment and ABS speed sensor signal.

OEM Toyota Sienna Differential

Front Differential

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Differentials found

View related parts
Toyota Sienna Differential Assembly, Rear
Part Number: 41110-45011
$985.83 MSRP: $1444.75
You Save: $458.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier Assembly, Differential; Differential, Rear; Carrier; Carrier Assembly, Differential, Rear; Differential
- Manufacturer Note: *FGR=41:18=2.277
- Position: Rear
- Replaces: 41110-45010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2020 Toyota Sienna | Base, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Carrier Assembly, Rear
Part Number: 41110-58010
$1931.19 MSRP: $2830.18
You Save: $898.99 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Carrier Assembly, Differential; Differential Carrier Assembly, Rear; Carrier; Carrier Assembly, Differential, Rear; Differential
- Manufacturer Note: *FGR=41:14=2.928
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sienna | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Differential Case
Part Number: 41311-14031
$291.60 MSRP: $416.34
You Save: $124.74 (30%)
Product Specifications
- Other Name: Case, Differential; Case; Case Sub-Assembly, Rear Differential; Case, Front Differential; Case, Rear Differential; Differential
- Replaces: 41311-14030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sienna | CE, LE, Limited, XLE, XLE Limited | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Sienna Differential Case
Part Number: 41301-48060
Product Specifications
- Other Name: Case Sub-Assembly, Differential; Differential Carrier, Rear; Case; Differential; Case Sub-Assembly, Rear Differential
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2020 Toyota Sienna | Base, L, LE, Limited, Limited Premium, SE, SE Premium, XLE, XLE Premium | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Sienna Differential

If you're thinking about purchasing OEM parts for your Toyota Sienna, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sienna Differential at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Sienna Differential Parts Questions & Experts Answers

Differential Case
41311-14031
Q: How to remove and replace the differential carrier on Toyota Sienna?
A: You must first put on the plate washer before tightening the rear differential side gear shaft bolt for the differential carrier replacement or removal process. Follow by installing the rear Drive Shaft assembly LH as the second step and proceed with the rear axle shaft nut LH installation afterward and the third step includes the rear Speed Sensor LH. The installer should start positioning the Exhaust Pipe components. You should mount the rear wheel and tighten it to 103 Nm (1,050 kgf-cm, 76 ft-lbf). To complete the installation check for exhaust gas leaks while you also conduct inspections of the rear wheel alignment and ABS speed sensor signal.