How to install the steering knuckle on the LH side on Toyota Sequoia?

The installation starts with applying the new knuckle grease retainer cap through tapping it with a brass bar while using a hammer to protect the non-reusable component. Service tools 09951-01030 and 09950-60020 should be used to install the steering knuckle oil seal while avoiding damage to this non-reusable component. The front suspension upper arm should be bolted to the steering knuckle LH and tightened to 110 Nm (1122 kgf-cm, 81 ft-lbf) while also installing a new clip by adjusting the bolt position to match the clip holes. Connect the lower front ball joint attachment which precedes the attachment of the tie rod end sub-assembly to the left hand side. The front axle hub sub-assembly LH requires installation while the front speed sensor LH connects to the steering knuckle through a bolt with a torque setting of 11 Nm (107 kgf-cm, 8 ft-lbf) and a clip attachment process follows. When attaching the front wheel tighten aluminum wheels to 131 Nm (1336 kgf-cm, 97 ft-lbf) as well as steel wheels to 209 Nm (2131 kgf-cm, 154 ft-lbf). The technician should start by checking the speed sensor signal before examining the SRS warning light and proceeding to check and adjust front wheel alignment.

OEM Toyota Sequoia Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Steering Knuckles found

View related parts
Toyota Sequoia Knuckle, Driver Side
Part Number: 43212-0C020
$566.35 MSRP: $830.00
You Save: $263.65 (32%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering, Left; Knuckle, Steering, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Knuckle, Driver Side
Part Number: 43212-0C012
$589.51 MSRP: $863.93
You Save: $274.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering, Left; Steering Knuckle, Front Left, Left; Knuckle, Steering, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2015 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Knuckle, Passenger Side
Part Number: 43211-0C012
$567.83 MSRP: $832.16
You Save: $264.33 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering, Right; Steering Knuckle, Front Right, Right; Knuckle, Steering, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2015 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Knuckle, Driver Side
Part Number: 43202-35071
$545.58 MSRP: $799.56
You Save: $253.98 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Sub-Assembly, Steering; Steering Knuckle, Front Left; Knuckle, Steering, Driver Side
- Position: Driver Side
- Replaces: 43202-35070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Knuckle, Driver Side
Part Number: 43202-34030
$506.20 MSRP: $741.84
You Save: $235.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Sub-Assembly, Steering; Steering Knuckle, Front Left; Knuckle, Steering, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Knuckle, Passenger Side
Part Number: 43201-35081
$545.58 MSRP: $799.56
You Save: $253.98 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Sub-Assembly, Steering; Steering Knuckle, Front Right; Knuckle, Steering, Passenger Side
- Position: Passenger Side
- Replaces: 43201-35080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Knuckle, Passenger Side
Part Number: 43201-34030
$542.75 MSRP: $795.40
You Save: $252.65 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Sub-Assembly, Steering; Steering Knuckle, Front Right; Knuckle, Steering, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Knuckle, Driver Side
Part Number: 43202-0C010
$343.33 MSRP: $503.15
You Save: $159.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Sub-Assembly, Steering; Steering Knuckle, Front Left; Knuckle, Steering, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Knuckle, Passenger Side
Part Number: 43201-0C010
$343.33 MSRP: $503.15
You Save: $159.82 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Sub-Assembly, Steering; Steering Knuckle, Front Right; Knuckle, Steering, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Knuckle, Passenger Side
Part Number: 43211-0C020
$592.57 MSRP: $868.43
You Save: $275.86 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering, Right; Knuckle, Steering, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

Toyota Sequoia Steering Knuckle

Choose genuine Steering Knuckle that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Steering Knuckle for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Steering Steering Knuckle in actual sense plays the vital role of coupling the suspension and the steering apparatus to the front wheels in the Toyota Sequoia range of automobiles. It has holes for mounting control arms, tie rod ends and spindle or hub; it is designed to move vertically with the road surface and horizontally with the steering. There are several types of steering knuckle: most commonly it is divided according to the type of drive - rear (RWD) or front, all-wheel or four-wheel (FWD/AWD/4WD). RWD layout may contain an integral spindle while FWD/ AWD /4WD layout may contain a hub attached to the knuckle, few 4WD trucks have a hollow spindle. Steering knuckles have gone through the kingpin to current ball joint system, resulting in improvement of performance and strength. Inspections must therefore be done from time to time to check on the condition of these parts especially after some suspension work has been done.

Toyota Sequoia Steering Knuckle Parts and Q&A

Knuckle, Driver Side
43212-0C012
Q: How to install the steering knuckle on the LH side on Toyota Sequoia?
A:
The installation starts with applying the new knuckle grease retainer cap through tapping it with a brass bar while using a hammer to protect the non-reusable component. Service tools 09951-01030 and 09950-60020 should be used to install the steering knuckle oil seal while avoiding damage to this non-reusable component. The front suspension upper arm should be bolted to the steering knuckle LH and tightened to 110 Nm (1122 kgf-cm, 81 ft-lbf) while also installing a new clip by adjusting the bolt position to match the clip holes. Connect the lower front Ball Joint attachment which precedes the attachment of the tie rod end sub-assembly to the left hand side. The front axle hub sub-assembly LH requires installation while the front Speed Sensor LH connects to the steering knuckle through a bolt with a torque setting of 11 Nm (107 kgf-cm, 8 ft-lbf) and a clip attachment process follows. When attaching the front wheel tighten aluminum wheels to 131 Nm (1336 kgf-cm, 97 ft-lbf) as well as steel wheels to 209 Nm (2131 kgf-cm, 154 ft-lbf). The technician should start by checking the speed sensor signal before examining the SRS warning light and proceeding to check and adjust front wheel alignment.

Related Toyota Sequoia Parts

Browse Toyota Sequoia Steering Knuckle by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001