How to install the hood cable assembly on Toyota Sequoia?

The cord assembly for controlling the hood lock starts by inserting it into the engine space while guiding the back end through the grommet until the stopper attaches then guiding the front section through the upper radiator support to clamp in the cable. Insert the hood lock control hood cable assembly to the hood lock control lever sub-assembly by using three claws to secure the installation of the hood lock lever. To install the hood lock assembly first lubricate its sliding areas with MP grease before installing it with a connector, hood lock control hood cable and torquing the 2 bolts and a nut to 8.0 Nm (82 kgf-cm, 71 in-lbf). The hood lock requires adjustment together with inspection before applying a new hood lock nut cap. After installing the hood lock control hood cable cover with its installed clamp you need to tighten the screw and nut to 4.0 Nm (41 kgf-cm, 35 in-lbf).

OEM Toyota Sequoia Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Hood Cables found

View related parts
Toyota Sequoia Release Cable, Front
Part Number: 53630-0C020
$32.01 MSRP: $44.56
You Save: $12.55 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2019 Toyota Sequoia | Limited, Platinum, SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Cable, Front
Part Number: 53630-0C010
$43.61 MSRP: $60.69
You Save: $17.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Release Lever, Gray, Front
Part Number: 53601-0C010-B0
$42.65 MSRP: $59.36
You Save: $16.71 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: GRAY,TRIM1#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2020 Toyota Sequoia | Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Cable, Front
Part Number: 53630-0C040
$31.95 MSRP: $44.48
You Save: $12.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Release Cable, Front
Part Number: 53630-0C021
$32.01 MSRP: $44.56
You Save: $12.55 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Lever, Beige, Front
Part Number: 53601-0C011-E1
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: SAND BEIGE,TRIM4#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Lever, Red, Front
Part Number: 53601-0C011-E0
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: REDROCK,TRIM2#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Handle, Front
Part Number: 53601-0C011-C2
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Release Lever, Black, Front
Part Number: 53601-0C011-C0
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Lever, Gray, Front
Part Number: 53601-0C011-B0
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: GRAY,TRIM1#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Lever, Beige, Front
Part Number: 53601-0C010-E1
$42.65 MSRP: $59.36
You Save: $16.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: SAND BEIGE,TRIM4#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2020 Toyota Sequoia | Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Lever, Red, Front
Part Number: 53601-0C010-E0
$42.65 MSRP: $59.36
You Save: $16.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2020 Toyota Sequoia | Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Release Lever, Black, Front
Part Number: 53601-0C010-C0
$42.65 MSRP: $59.36
You Save: $16.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2020 Toyota Sequoia | Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Cable Handle, Front
Part Number: 53601-01020-E4
$54.00 MSRP: $75.17
You Save: $21.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: SANDAL WOOD,TRIM42,43
- Position: Front
- Replaces: 53601-10020-E6
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Release Switch, Medium Gray, Front
Part Number: 53601-01020-B4
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Cable Handle; Lever; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Replaces: 53601-01020-E3
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS

Toyota Sequoia Hood Cable

Choose genuine Hood Cable that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Hood Cable for your Toyota Sequoia? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Sequoia Hood Cable Parts and Q&A

Release Cable, Front
53630-0C020
Q: How to install the hood cable assembly on Toyota Sequoia?
A:
The cord assembly for controlling the hood lock starts by inserting it into the engine space while guiding the back end through the grommet until the stopper attaches then guiding the front section through the upper radiator support to clamp in the cable. Insert the hood lock control hood cable assembly to the hood lock control lever sub-assembly by using three claws to secure the installation of the hood lock lever. To install the hood lock assembly first lubricate its sliding areas with MP grease before installing it with a connector, hood lock control hood cable and torquing the 2 bolts and a nut to 8.0 Nm (82 kgf-cm, 71 in-lbf). The hood lock requires adjustment together with inspection before applying a new hood lock nut cap. After installing the hood lock control hood cable cover with its installed clamp you need to tighten the screw and nut to 4.0 Nm (41 kgf-cm, 35 in-lbf).

Related Toyota Sequoia Parts

Browse Toyota Sequoia Hood Cable by Years

2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001