Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
Position: Front
Part Name Code: 53601
Item Weight: 0.50 Pounds
Item Dimensions: 12.9 x 10.9 x 1.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 53601-0C010-E0
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2008 Toyota Sequoia Submodels:
Limited, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2008 Toyota Sequoia Hood Cable
Looking for affordable OEM 2008 Toyota Sequoia Hood Cable? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Hood Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2008 Toyota Sequoia Hood Cable Parts Q&A
Q: How to install the hood cable assembly on 2008 Toyota Sequoia?
A: The cord assembly for controlling the hood lock starts by inserting it into the engine space while guiding the back end through the grommet until the stopper attaches then guiding the front section through the upper radiator support to clamp in the cable. Insert the hood lock control hood cable assembly to the hood lock control lever sub-assembly by using three claws to secure the installation of the hood lock lever. To install the hood lock assembly first lubricate its sliding areas with MP grease before installing it with a connector, hood lock control hood cable and torquing the 2 bolts and a nut to 8.0 Nm (82 kgf-cm, 71 in-lbf). The hood lock requires adjustment together with inspection before applying a new hood lock nut cap. After installing the hood lock control hood cable cover with its installed clamp you need to tighten the screw and nut to 4.0 Nm (41 kgf-cm, 35 in-lbf).