How to service and repair the A/C Condenser on Toyota Sequoia?

The procedure to service and repair the HVAC condenser starts with draining refrigerant from the refrigeration system by evacuating air completely and adding the correct amount of refrigerant: Single A/C needs 750 plus or minus 50 g (26.45 plus or minus 1.76 oz.) while Dual A/C needs 1050 plus or minus 50 g (37.03 plus or minus 1.76 oz.). The service includes removing the condenser cooling fan together with both A/T oil cooler assemblies and horns as well as the hood lock and hood lock support brace. To proceed with the operation disconnect both tube and hose from the discharge hose by removing its 2 bolts and applying 5.4 N.m (5.5 kgf.cm, 48 in.lbf) of torque. Apply compressor oil to two fresh O-rings and install them to the tubes before you fasten their openings with caps to stop outside moisture or contaminants. To disconnect the liquid pipe start by removing 2 bolts which allows detaching both hose and tube. Maintain a torque of 5.4 N.m (5.5 kgf.cm, 48 in.lbf) and quickly apply caps to the tube ends. Uninstall the condenser assembly through the removal of two bolts while pulling the components forward and raising them up. The replacement condenser requires 40 to 50 cc (1.4 to 1.7 fl.oz.) of ND-OIL 8 or an equivalent compressor oil to be added to the compressor system. The installation process requires procedures that reverse the steps used in the removal process.

OEM Toyota Sequoia A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Condensers found

View related parts
Toyota Sequoia Condenser Assembly
Part Number: 88460-AZ007
$163.98 MSRP: $231.77
You Save: $67.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2019 Toyota Sequoia | Limited, Platinum, SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Condenser Assembly
Part Number: 88460-AZ027
$126.14 MSRP: $178.27
You Save: $52.13 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS
View related parts
Toyota Sequoia Condenser Assembly
Part Number: 88460-0C101
$268.99 MSRP: $384.05
You Save: $115.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser; Condenser Assembly, Cooler
- Replaces: 88460-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2019 Toyota Sequoia | Limited, Platinum, SR5, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Condenser Assembly
Part Number: 884A0-34010
$299.98 MSRP: $428.29
You Save: $128.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly, Support; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Sequoia | Capstone, Limited, Platinum, SR5, TRD Pro | 6 Cyl 3.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Sequoia Condenser Assembly
Part Number: 88460-0C180
$307.78 MSRP: $439.44
You Save: $131.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser; Condenser Assembly, Cooler
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Sequoia | Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 5.7 L GAS
View related parts
Toyota Sequoia Condenser Assembly
Part Number: 88460-0C080
$315.18 MSRP: $450.01
You Save: $134.83 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Condenser; Condenser; Condenser Assembly, Cooler
- Replaces: 88460-0C030, 88461-0C020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7 L GAS

Toyota Sequoia A/C Condenser

If you're thinking about purchasing OEM parts for your Toyota Sequoia, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sequoia A/C Condenser at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Sequoia A/C Condenser Parts Questions & Experts Answers

Condenser Assembly
88460-0C080
Q: How to service and repair the A/C Condenser on Toyota Sequoia?
A: The procedure to service and repair the HVAC condenser starts with draining refrigerant from the refrigeration system by evacuating air completely and adding the correct amount of refrigerant: Single A/C needs 750 plus or minus 50 g (26.45 plus or minus 1.76 oz.) while Dual A/C needs 1050 plus or minus 50 g (37.03 plus or minus 1.76 oz.). The service includes removing the condenser cooling fan together with both A/T oil cooler assemblies and horns as well as the hood lock and hood lock support brace. To proceed with the operation disconnect both tube and hose from the discharge hose by removing its 2 bolts and applying 5.4 N.m (5.5 kgf.cm, 48 in.lbf) of torque. Apply compressor oil to two fresh O-rings and install them to the tubes before you fasten their openings with caps to stop outside moisture or contaminants. To disconnect the liquid pipe start by removing 2 bolts which allows detaching both hose and tube. Maintain a torque of 5.4 N.m (5.5 kgf.cm, 48 in.lbf) and quickly apply caps to the tube ends. Uninstall the condenser assembly through the removal of two bolts while pulling the components forward and raising them up. The replacement condenser requires 40 to 50 cc (1.4 to 1.7 fl.oz.) of ND-OIL 8 or an equivalent compressor oil to be added to the compressor system. The installation process requires procedures that reverse the steps used in the removal process.