How to service and repair the wheel bearing on Toyota Land Cruiser?

Begin the wheel bearing service and repair process by dismantling its components through screwdriver-assisted oil seal pry-out followed by removing the bearing from the axle hub. A brass bar should be used with a hammer to extract bearing outer races from the assembly while carefully guarding the ABS speed sensor rotor. Examine all bearing components after cleaning them for any sign of deterioration throughout the inspection process. Mount the axle hub with disc into a soft jaw vice but do not tighten the jaws before placing matchmarks on the hub and disc then removing the five bolts that separate them. Mount the disc in a soft jaw vice and align its matchmarks when installing the 5 axle hub bolts while torquing them to 74 Nm (750 kgf-cm, 54 ft. lbs). Install the new outside bearing outer race with Special Service Tool: 09950-60020 (09951-00730), 09950-70010 (09951-07100), and a hammer followed by the new inside bearing outer race using the same tools, being careful to protect the ABS speed sensor rotor. Apply MP grease to the new bearing until its outside produces excess grease while completely covering the entire bearing circumference. Apply MP grease inside the axle hub before putting the inner bearing into position. To install the new oil seal into the axle hub users should apply Special Service Tools 09950-60020 (09951-01030) and 09950-70010 (09951-07100) with a hammer and be careful not to damage the ABS speed sensor rotor while coating the lip of the oil seal with MP grease.

OEM Toyota Land Cruiser Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Wheel Bearings found

View related parts
Toyota Land Cruiser Wheel Bearing
Part Number: 90368-49084-77
$53.44 MSRP: $74.39
You Save: $20.95 (29%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rtp, 50, 82, K; Wheel Hub Repair Kit; Bearing Races; Axle Bearing; Wheel Hub; Wheel Bearings; Front Wheel Bearing; Axle Bearings; Front Hub Bearing; Inner Bearing; Bearing
- Replaces: 90368-49084, 90080-36064
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1997 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS, 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Wheel Bearings
Part Number: 90366-17001-77
$29.48 MSRP: $41.03
You Save: $11.55 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rtp, 17, 47, K; Multi-Purpose Bearing; Wheel Bearing; Bearing
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1990 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
Toyota Land Cruiser Hub Assembly, Front
Part Number: 43502-69046
$300.43 MSRP: $428.95
You Save: $128.52 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Front Hub; Rotor Hub; Hub & Bearing
- Position: Front
- Replaces: 43502-69045, 43502-60040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1997 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Hub Assembly, Front
Part Number: 43503-69035
$368.52 MSRP: $540.07
You Save: $171.55 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Bearing and Hub Assembly, Front; Wheel Hub Repair Kit; Wheel Hub; Front Hub
- Position: Front
- Replaces: 43503-69015
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Axle Bearings, Rear
Part Number: 90365-47013
$101.27 MSRP: $142.15
You Save: $40.88 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Cylindrical; Wheel Bearing; Axle Bearing; Bearing; Bearing(For Rear Axle Shaft)
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1994 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS, 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Front Wheel Bearing
Part Number: 90080-36098
$78.28 MSRP: $109.88
You Save: $31.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Tapered Roll; Wheel Bearing, Front Inner; Bearing Races; Axle Bearing; Inner Bearing; Front Axle Hub Inner Passenger & Driver Side Wheel Bearing.
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Front Wheel Bearing
Part Number: 43570-60031
$206.51 MSRP: $294.85
You Save: $88.34 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Front Axle; Wheel Bearing, Front Left/Right; Hub Assembly; Bearing Kit; Hub Module; Bearing Assembly; Front Axle W/ABS Rotor, Passenger & Driver Side; Wheel Bearing
- Position: Front
- Replaces: 43570-60030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Hub Assembly, Front
Part Number: 43502-60190
$179.51 MSRP: $256.30
You Save: $76.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub, Front; Wheel Hub Repair Kit; Front Hub; Hub Sub-Assembly, Front Axle, Passenger Side; Hub Sub-Assembly, Front Axle, Driver Side; Wheel Hub
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Bearing Housing, Passenger Side
Part Number: 42450-60070
$343.52 MSRP: $490.48
You Save: $146.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Rear Axle; Wheel Bearing & Hub; Wheel Hub Repair Kit; Axle Bearing; Wheel Hub; Hub & Bearing; Hub & Bearing Assembly; Hub & Bearing Assembly, Rear Axle, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Wheel Bearing
Part Number: 90369-48001
$149.27 MSRP: $211.31
You Save: $62.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing; Drive Axle Shaft Bearing, Rear; Axle Bearing; Axle Bearings; Shaft Bearings; Bearing(For Rear Axle Shaft Passenger Side); Bearing(For Rear Axle Shaft Driver Side)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Bearing Housing, Driver Side
Part Number: 42460-60030
$343.52 MSRP: $490.48
You Save: $146.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Rear Axle; Wheel Bearing & Hub; Wheel Hub Repair Kit; Axle Bearing; Wheel Hub; Hub & Bearing; Hub & Bearing Assembly; Hub & Bearing Assembly, Rear Axle, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2021, 2008-2011 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Rotor Hub, Rear
Part Number: 42450-69016
$511.58 MSRP: $749.72
You Save: $238.14 (32%)
Product Specifications
- Other Name: Hub&Bearing Assembly, Rear Axle; Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing
- Position: Rear
- Replaces: 42450-69015
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1997 Toyota Land Cruiser | Base | 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Bearing, Tapered Roller (For Front Axle Outer Bearing)
Part Number: 90080-36067
Product Specifications
- Other Name: Bearing, Tapered Roll; Rear Axle Outer; Front Axle Hub Outer; Wheel Hub Repair Kit; Wheel Bearing Kit.
- Manufacturer Note: TIMKEN
- Replaces: 90368-45087
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-2007 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS, 6 Cyl 4.5 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Hub, Front
Part Number: 43502-69125
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub Repair Kit; Wheel Hub Module; Wheel Hub
- Position: Front
- Replaces: 43510-60100, 43502-60020, 43502-39095
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1990 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS

Toyota Land Cruiser Wheel Bearing

If you're thinking about purchasing OEM parts for your Toyota Land Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Land Cruiser Wheel Bearing at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Land Cruiser Wheel Bearing Parts Questions & Experts Answers

Hub Assembly, Front
43503-69035
Q: How to service and repair the wheel bearing on Toyota Land Cruiser?
A: Begin the wheel bearing service and repair process by dismantling its components through screwdriver-assisted oil seal pry-out followed by removing the bearing from the axle hub. A brass bar should be used with a hammer to extract bearing outer races from the assembly while carefully guarding the ABS speed sensor rotor. Examine all bearing components after cleaning them for any sign of deterioration throughout the inspection process. Mount the axle hub with disc into a soft jaw vice but do not tighten the jaws before placing matchmarks on the hub and disc then removing the five bolts that separate them. Mount the disc in a soft jaw vice and align its matchmarks when installing the 5 axle hub bolts while torquing them to 74 Nm (750 kgf-cm, 54 ft. lbs). Install the new outside bearing outer race with Special Service Tool: 09950-60020 (09951-00730), 09950-70010 (09951-07100), and a hammer followed by the new inside bearing outer race using the same tools, being careful to protect the ABS speed sensor rotor. Apply MP grease to the new bearing until its outside produces excess grease while completely covering the entire bearing circumference. Apply MP grease inside the axle hub before putting the inner bearing into position. To install the new oil seal into the axle hub users should apply Special Service Tools 09950-60020 (09951-01030) and 09950-70010 (09951-07100) with a hammer and be careful not to damage the ABS speed sensor rotor while coating the lip of the oil seal with MP grease.