How to install the Hood Cable Assembly on Toyota Land Cruiser?

The Hood Cable installation process begins by passing the cable through the grommet from the rear engine room entry point until the cable stopper attachment. You should now guide the front end of the cable inside the upper radiator support before attaching the clamps according to the provided illustrations. The installation begins when you connect the hood cable followed by hooking the claws to put in the Hood Lock Control Lever Sub-Assembly. Mount the Front Fender Main Seal LH by using three clips for its securement. Installation of Hood Lock Assembly requires MP grease application on sliding parts and hood cable connection followed by the installation of 2 bolts with a nut to 5.5 Nm (56 kgf-cm, 49 in-lbf) torque before connector connection. Fasten the new hood lock nut cap before connecting the claw tool to install the Hood Cable Cover while securing it with 3 screws. Mount the Radiator Grille along with the Upper Radiator Support Seal in the last step.

OEM Toyota Land Cruiser Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Hood Cables found

View related parts
Toyota Land Cruiser Lever Sub-Assembly, Hood Lock Control, Front
Part Number: 53601-02020-C0
$52.44 MSRP: $72.98
You Save: $20.54 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Land Cruiser | Base | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Release Cable
Part Number: 53630-90A01
$42.64 MSRP: $59.35
You Save: $16.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable; Cable Assembly, Hood Lock Control
- Replaces: 53630-90A00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1990 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.2 L GAS
View related parts
Toyota Land Cruiser Cable Assembly, Hood Lock Control, Front
Part Number: 53630-60140
$35.40 MSRP: $49.28
You Save: $13.88 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015, 2008-2011 Toyota Land Cruiser | Base | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Cable Assembly, Hood Lock Control, Front
Part Number: 53630-60060
$39.79 MSRP: $55.40
You Save: $15.61 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2002 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Cable Assembly, Hood Lock Control
Part Number: 53630-60010
$46.06 MSRP: $64.10
You Save: $18.04 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1997 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.5 L GAS
View related parts
Toyota Land Cruiser Lever Sub-Assembly, Hood
Part Number: 53601-20060-C0
$70.01 MSRP: $98.26
You Save: $28.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: LEVER SUB-ASSY, HOOD
- Position: Front
- Replaces: 53601-20060-33, 53601-12030-03, 53601-12030-12, 53601-20060-A1, 53601-20060-B0, 53601-20060-36, 53601-12030-22, 53601-20060-04, 53601-20060-22, 53601-12030-02, 53601-20060-03, 53601-20060-05, 53601-20060-E0, 53601-20060-24, 53601-10020-B2, 53601-10020-B4, 53601-12030-14, 53601-10020-33, 53601-12030-04, 53601-20060-01, 53601-20060-11, 53601-20060-15, 53601-12030-01, 53601-20060-53, 53601-20060-B5, 53601-20060-32, 53601-20060-A0
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-2007 Toyota Land Cruiser | Base | 6 Cyl 4.0 L GAS, 6 Cyl 4.5 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Release Cable, Front
Part Number: 53630-60210
$31.95 MSRP: $44.48
You Save: $12.53 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2016-2021 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Cable Assembly, Hood Lock Control, Front
Part Number: 53630-60110
$39.79 MSRP: $55.40
You Save: $15.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Lock; Hood Release Cable
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS
View related parts
Toyota Land Cruiser Release Lever, Beige, Front
Part Number: 53601-52010-L1
$43.25 MSRP: $60.19
You Save: $16.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2021 Toyota Land Cruiser | Base, Heritage Edition | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Release Lever, Brown, Front
Part Number: 53601-52010-E5
$42.60 MSRP: $59.30
You Save: $16.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: DK. BROWN,TRIM4#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Toyota Land Cruiser | Base | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Release Lever, Sand, Front
Part Number: 53601-52010-A3
$42.60 MSRP: $59.30
You Save: $16.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: SHELL,TRIM0#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2015 Toyota Land Cruiser | Base | 8 Cyl 5.7 L GAS
View related parts
Toyota Land Cruiser Release Handle, Medium Gray, Front
Part Number: 53601-20060-B6
$63.09 MSRP: $88.55
You Save: $25.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lever Sub-Assembly, Hood; Hood Release Handle, Front; Handle; Lever Sub-Assembly, Hood Lock Control
- Manufacturer Note: STONE,TRIM1#
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Land Cruiser | Base | 8 Cyl 4.7 L GAS

Toyota Land Cruiser Hood Cable

If you're thinking about purchasing OEM parts for your Toyota Land Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Land Cruiser Hood Cable at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Land Cruiser Hood Cable Parts Questions & Experts Answers

Lever Sub-Assembly, Hood Lock Control, Front
53601-02020-C0
Q: How to install the Hood Cable Assembly on Toyota Land Cruiser?
A: The Hood Cable installation process begins by passing the cable through the grommet from the rear engine room entry point until the cable stopper attachment. You should now guide the front end of the cable inside the upper radiator support before attaching the clamps according to the provided illustrations. The installation begins when you connect the hood cable followed by hooking the claws to put in the Hood Lock Control Lever Sub-Assembly. Mount the Front Fender Main Seal LH by using three clips for its securement. Installation of Hood Lock Assembly requires MP grease application on sliding parts and hood cable connection followed by the installation of 2 bolts with a nut to 5.5 Nm (56 kgf-cm, 49 in-lbf) torque before connector connection. Fasten the new hood lock nut cap before connecting the claw tool to install the Hood Cable Cover while securing it with 3 screws. Mount the Radiator Grille along with the Upper Radiator Support Seal in the last step.