How to remove the Vapor Canister on Toyota Highlander?

Start with removing the tail exhaust pipe assembly ahead of the center exhaust pipe assembly before proceeding to detach the Evaporative Emission Control Canister. The removal of the No. 3 front floor heat insulator requires you to unscrew its 4 bolts. Pull out the quick connector going towards the pipe side by pressing the retainer then disconnecting the charcoal canister fuel hose from the charcoal canister assembly. Finally disconnect the tube and the connector and the hose in that order. Remove all foreign materials from the quick connector before starting the procedure because the fuel hose connector uses an O-ring to create a pipe seal and avoid damaging the parts with scratches or other foreign objects during disconnection. A manual disconnection of the nylon tube should be performed without tools while avoiding any forceful bending or twisting of the tubing. The connected part of the charcoal canister fuel hose needs protection through a vinyl bag following its removal. To loose connection between the quick connector and pipe use gentle pressure and pulling motions. You should remove the 3 nuts to extract the charcoal canister assembly.

How to install the Vapor Canister and ensure proper connections on Toyota Highlander?

The installation of the charcoal canister assembly requires tightening 3 nuts to 5.5 Nm (56 kgf-cm, 49 in-lbf). Insert the quick connector to its pipe attachment point while pushing it until it clicks to establish proper connection of the charcoal canister fuel hose through quick connector retention. The hose requires installation together with the hose connector. The No. 3 front floor heat insulator installation requires 4 bolts tightened to 4.9 Nm (50 kgf-cm, 43 in-lbf). The next step requires the installation of the exhaust center pipe assembly followed by installation of the tail exhaust pipe assembly. Thoroughly inspect exhaust gas leaks before making any repairs on damaged or worn parts.

OEM Toyota Highlander Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Vapor Canisters found

View related parts
Toyota Highlander Vapor Canister
Part Number: 77740-0E030
$299.16 MSRP: $427.13
You Save: $127.97 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister Assembly, Charcoal
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2016 Toyota Highlander | LE, LE Plus, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Canister Assembly, Charcoal
Part Number: 77740-0E020
$299.16 MSRP: $427.13
You Save: $127.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Replaces: 77740-48121
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2013 Toyota Highlander | Base, Limited, Plus, SE, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Canister Assembly, Charcoal
Part Number: 77740-48140
$705.16 MSRP: $1033.42
You Save: $328.26 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2013 Toyota Highlander | Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Vapor Canister
Part Number: 77740-48100
$379.42 MSRP: $556.04
You Save: $176.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister Assembly, Charcoal
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Highlander | Base, Limited, Sport | 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Vapor Canister
Part Number: 77740-48080
$405.98 MSRP: $594.97
You Save: $188.99 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister Assembly, Charcoal
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Highlander Vapor Canister
Part Number: 77740-0E080
$404.84 MSRP: $593.30
You Save: $188.46 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister Assembly, Charcoal
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2019 Toyota Highlander | LE, LE Plus, Limited, Limited Platinum, SE, XLE | 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Canister Assembly, Charcoal
Part Number: 77740-0E100
$314.19 MSRP: $448.59
You Save: $134.40 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Canister Assembly, Charcoal
Part Number: 77740-0E050
$253.49 MSRP: $361.93
You Save: $108.44 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Pump Assembly
Part Number: 77730-0E010
$274.93 MSRP: $392.54
You Save: $117.61 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister Assembly, Charcoal; Vapor Canister; Vapor Separator; Canister
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Vapor Canister
Part Number: 77740-0E120
$386.57 MSRP: $566.52
You Save: $179.95 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister Assembly, Charcoal
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2019 Toyota Highlander | LE | 4 Cyl 2.7 L GAS
View related parts
Toyota Highlander Canister Assembly, Charcoal
Part Number: 77740-06240
$529.13 MSRP: $775.45
You Save: $246.32 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vapor Canister
- Replaces: 77740-33240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota Highlander | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Vapor Canister
Part Number: 77740-48120
Product Specifications
- Other Name: Canister Assembly, Charcoal
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004 Toyota Highlander | Base | 4 Cyl 2.4 L GAS

Toyota Highlander Vapor Canister

Choose genuine Vapor Canister that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Vapor Canister for your Toyota Highlander? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Vapor Canister in Toyota Highlander cars is an excellent part of the evaporative emissions control (EVAP) system which is in charge of minimizing hydrocarbon emissions to the environment. It operates through the fuel tank which has a fitted carbon canister that is filled with activated charcoal that absorbs these vapors. During operation of the engine, a purge valve opens and admits a raw air and fuel vapor mixture into the engine space for combustion. The Highlander has seen multiple generations over the years and various such models have used different Vapor Canisters whilst some of them used filters that can be changed for continuous efficiency. The modern Highlander have sophisticated components of EVAP such as the canister vent solenoid and fuel tank pressure sensor to diagnose the problem of leakage and control the overall efficiency and effectiveness of the system. These enhancements play the important part of enhancing the vehicle's environmental friendliness without reducing its engine characteristics.

Toyota Highlander Vapor Canister Parts and Q&A

Canister Assembly, Charcoal
77740-48140
Q: How to remove the Vapor Canister on Toyota Highlander?
A:
Start with removing the tail Exhaust Pipe assembly ahead of the center exhaust pipe assembly before proceeding to detach the Evaporative Emission Control Canister. The removal of the No. 3 front floor heat insulator requires you to unscrew its 4 bolts. Pull out the quick connector going towards the pipe side by pressing the retainer then disconnecting the charcoal canister fuel hose from the charcoal canister assembly. Finally disconnect the tube and the connector and the hose in that order. Remove all foreign materials from the quick connector before starting the procedure because the fuel hose connector uses an O-ring to create a pipe seal and avoid damaging the parts with scratches or other foreign objects during disconnection. A manual disconnection of the nylon tube should be performed without tools while avoiding any forceful bending or twisting of the tubing. The connected part of the charcoal canister fuel hose needs protection through a vinyl bag following its removal. To loose connection between the quick connector and pipe use gentle pressure and pulling motions. You should remove the 3 nuts to extract the charcoal canister assembly.
Canister Assembly, Charcoal
77740-0E020
Q: How to install the Vapor Canister and ensure proper connections on Toyota Highlander?
A:
The installation of the charcoal canister assembly requires tightening 3 nuts to 5.5 Nm (56 kgf-cm, 49 in-lbf). Insert the quick connector to its pipe attachment point while pushing it until it clicks to establish proper connection of the charcoal canister fuel hose through quick connector retention. The hose requires installation together with the hose connector. The No. 3 front floor heat insulator installation requires 4 bolts tightened to 4.9 Nm (50 kgf-cm, 43 in-lbf). The next step requires the installation of the exhaust center pipe assembly followed by installation of the tail Exhaust Pipe assembly. Thoroughly inspect exhaust gas leaks before making any repairs on damaged or worn parts.

Related Toyota Highlander Parts

Browse Toyota Highlander Vapor Canister by Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001