The installation of the Canister Purge Valve begins by installing the No. 1 vacuum switching valve onto the air cleaner hose while also attaching the 2 fuel vapor feed hoses correctly through the clamp orientation. The next operation involves connecting both the wire harness clamp along with the No. 1 vacuum switching valve connector. First install the outer cowl top panel sub-assembly followed by adding the windshield
Wiper Motor with its link assembly. Start by fixing the front wiper arm and blade assembly on the right side followed by the cowl top ventilator louver sub-assembly and lastly install the parts for the left side. Finally, install the ejector tube.