How to remove the parking brake cable assembly on Toyota Highlander?

The first step to remove the parking brake cable involves taking out the parking brake control pedal assembly. First disconnect the No. 1 parking brake cable assembly through the process of adjusting the nut and clip before elevating the parking brake pedal claw to release the assembly. Both 2WD and 4WD vehicles require disassembly of their rear disc brake caliper unit after wheel removal. You should remove the rear disc first and then proceed with taking out the No. 1 parking brake shoe return tension spring before disassembling the No. 1 parking brake shoe assembly. The first step involves taking out the parking brake shoe strut and proceeding with the disassembly of the No. 2 parking brake shoe assembly. The first step is to remove the parking brake shoe adjusting screw set from the sequence and then separate the No. 1 parking brake shoe assembly. Continue the procedure by eliminating first the No. 2 parking brake shoe return tension spring and then the No. 2 parking brake shoe assembly including its parking brake shoe lever. Detach the No. 3 parking brake cable assembly from the backing plate by removing its 2 bolts and separate it completely using 2 bolts and 4 nuts. You should remove the support bracket from the No. 1 parking brake cable assembly of the No. 3 parking brake cable. Separate the No. 2 parking brake cable assembly from the backing plate by unfastening its 2 bolts before detaching it with its 2 bolts and 5 nuts. The last step for both assembly brackets is to eliminate the support bracket from the No. 2 parking brake cable assembly before disassembling the bracket from the adjacent assembly.

How to install the parking brake cable on Toyota Highlander?

Attach the No. 1 parking brake cable support bracket first to the No. 3 parking brake cable assembly. Thread in the No. 3 parking brake cable assembly at 2 bolt points with 4 nuts before bolt torques of 8.5 Nm (87 kgf-cm, 75 in-lbf) for Bolt (A) and 39 Nm (397 kgf-cm, 29 ft-lbf) for Bolt (B) then each nut to 6.0 Nm (61 kgf-cm, 53 in-lbf). Fasten the No. 3 parking brake cable assembly onto the backing plate with 2 bolts that need to be tightened to 8.0 Nm of torque (82 kgf-cm or 71 in-lbf). Fasten the parking brake cable support bracket to the No. 2 parking brake cable assembly and immediately attach the cable support bracket to the same assembly. Secure two bolts with five nuts at the No. 2 parking brake cable assembly. Bolt A needs 8.5 Nm torque and Bol B requires 39 Nm. Each nut should get 6.0 Nm. You can now attach the backing plate using two bolts at 8.0 Nm. Put on the shoe assembly number 2 and attach the lever followed by number 2 tension return spring. Next add the number 1 shoe assembly and parking brake adjusting screws. Finally connect number 2 shoe assembly. Put the parking brake shoe strut in place, then seat and guide the No. 1 parking brake shoe assembly. Lastly attach its return tension spring. Inspect and install the parking brake for both 2WD and 4WD models before putting on the rear disc and rear disc brake caliper. After torqueing the rear wheel at 103 Nm put the No. 1 parking brake cable through the pedal and fasten its clip. You can then add the adjusting nut temporarily to bend the parking brake pedal claw. Finish installation by putting the brake parking control assembly then prepare the brakes for service before testing both adjustment systems.

OEM Toyota Highlander Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Parking Brake Cables found

View related parts
Toyota Highlander Cable Assembly, Parking
Part Number: 46420-48171
$89.57 MSRP: $125.74
You Save: $36.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE ASSY, PARKING; Brake Cable
- Replaces: 46420-48090, 46420-48170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Highlander | Base, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46430-48181
$99.29 MSRP: $139.38
You Save: $40.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable
- Replaces: 46430-48180, 46430-48100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2007 Toyota Highlander | Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Rear Cable
Part Number: 46430-48171
$99.29 MSRP: $139.38
You Save: $40.09 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable
- Replaces: 46430-48090, 46430-48170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Highlander | Base, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Front Cable
Part Number: 46410-48060
$70.73 MSRP: $99.29
You Save: $28.56 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Highlander | Base, Limited, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46420-48080
$117.78 MSRP: $165.32
You Save: $47.54 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46430-48080
$83.77 MSRP: $117.59
You Save: $33.82 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46420-0E060
$79.62 MSRP: $111.76
You Save: $32.14 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46420-0E070
$82.35 MSRP: $115.59
You Save: $33.24 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Rear Cable
Part Number: 46420-48181
$86.97 MSRP: $122.07
You Save: $35.10 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable
- Replaces: 46420-48100, 46420-48180
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2007 Toyota Highlander | Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Front Cable
Part Number: 46410-0E070
$52.68 MSRP: $73.32
You Save: $20.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Rear Cable
Part Number: 46430-0E051
$84.60 MSRP: $118.75
You Save: $34.15 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-0E050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2013 Toyota Highlander | Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46420-0E051
$85.43 MSRP: $119.92
You Save: $34.49 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-0E050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2013 Toyota Highlander | Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46430-48141
$89.57 MSRP: $125.74
You Save: $36.17 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-48140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2013 Toyota Highlander | Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Rear Cable
Part Number: 46420-48070
$117.54 MSRP: $164.99
You Save: $47.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46420-48141
$89.22 MSRP: $125.23
You Save: $36.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46420-48140
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2013 Toyota Highlander | Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Rear Cable
Part Number: 46430-0E060
$72.04 MSRP: $101.12
You Save: $29.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46430-48070
$82.23 MSRP: $115.42
You Save: $33.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Highlander Front Cable
Part Number: 46410-0E050
$63.74 MSRP: $89.48
You Save: $25.74 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46410-48130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2013 Toyota Highlander | Base, Limited, Plus, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Rear Cable
Part Number: 46430-0E070
$73.34 MSRP: $102.94
You Save: $29.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE | 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Highlander Front Cable
Part Number: 46410-48090
$68.60 MSRP: $96.29
You Save: $27.69 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2007 Toyota Highlander | Hybrid, Hybrid Limited | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)

| Page 1 of 2 |Next >

1-20 of 23 Results

Toyota Highlander Parking Brake Cable

Choose genuine Parking Brake Cable that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Parking Brake Cable for your Toyota Highlander? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Highlander Parking Brake Cable is a critical assembly part of the automobile, whose main responsibility is to make sure that the Toyota Highlander stays parked especially where there are gradients or slopes of any kind. Being highly recognized and appreciated for its high quality and excellent performance, this Parking Brake Cable plays an important role in connecting the parking brake to the entire braking system to ensure the parking brake has a better engagement to the further improvement of the overall efficiency and safeness. Ideal for the five-seater and the seven-seater variants of Toyota Highlander, this Parking Brake Cable is intentionally developed to cater to each of the respective trims to guarantee compatibility that is also fully effective. It is vital to service the Toyota Highlander Parking Brake Cable since the wearing or stretching of the cable can compromise the engagement of the parking brake, which is very essential for safety. This is a picture of a parking brake that shows how foresight in periodic checks would have helped in avoiding circumstances like a broken cable that would mean no parking brake entirely. Most importantly, Toyota Highlander Parking Brake Cable is built with high quality material that is further enhanced to be strong and tough hence durable for use while on road the reputation of a smooth service. In this respect, the use of this material makes it durable over other automotive materials, thus making it a preferred material for any Highlander owner. Being a component with such a significant part in the overall braking system of the car, let alone its contribution towards improving the performance of the automobile as well as the well-being of the passengers and the driver, the Toyota Highlander Parking Brake Cable is truly worthy of its place in the middle of the Toyota Highlander line.

Toyota Highlander Parking Brake Cable Parts and Q&A

Rear Cable
46420-0E051
Q: How to remove the parking brake cable assembly on Toyota Highlander?
A:
The first step to remove the parking brake cable involves taking out the parking brake control pedal assembly. First disconnect the No. 1 parking brake cable assembly through the process of adjusting the nut and clip before elevating the parking brake pedal claw to release the assembly. Both 2WD and 4WD vehicles require disassembly of their rear disc Brake Caliper unit after wheel removal. You should remove the rear disc first and then proceed with taking out the No. 1 parking brake shoe return tension spring before disassembling the No. 1 parking brake shoe assembly. The first step involves taking out the parking brake shoe strut and proceeding with the disassembly of the No. 2 parking brake shoe assembly. The first step is to remove the parking brake shoe adjusting screw set from the sequence and then separate the No. 1 parking brake shoe assembly. Continue the procedure by eliminating first the No. 2 parking brake shoe return tension spring and then the No. 2 parking brake shoe assembly including its parking brake shoe lever. Detach the No. 3 parking brake cable assembly from the backing plate by removing its 2 bolts and separate it completely using 2 bolts and 4 nuts. You should remove the support bracket from the No. 1 parking brake cable assembly of the No. 3 parking brake cable. Separate the No. 2 parking brake cable assembly from the backing plate by unfastening its 2 bolts before detaching it with its 2 bolts and 5 nuts. The last step for both assembly brackets is to eliminate the support bracket from the No. 2 parking brake cable assembly before disassembling the bracket from the adjacent assembly.
Front Cable
46410-48110
Q: How to install the parking brake cable on Toyota Highlander?
A:
Attach the No. 1 parking brake cable support bracket first to the No. 3 parking brake cable assembly. Thread in the No. 3 parking brake cable assembly at 2 bolt points with 4 nuts before bolt torques of 8.5 Nm (87 kgf-cm, 75 in-lbf) for Bolt (A) and 39 Nm (397 kgf-cm, 29 ft-lbf) for Bolt (B) then each nut to 6.0 Nm (61 kgf-cm, 53 in-lbf). Fasten the No. 3 parking brake cable assembly onto the backing plate with 2 bolts that need to be tightened to 8.0 Nm of torque (82 kgf-cm or 71 in-lbf). Fasten the parking brake cable support bracket to the No. 2 parking brake cable assembly and immediately attach the cable support bracket to the same assembly. Secure two bolts with five nuts at the No. 2 parking brake cable assembly. Bolt A needs 8.5 Nm torque and Bol B requires 39 Nm. Each nut should get 6.0 Nm. You can now attach the backing plate using two bolts at 8.0 Nm. Put on the shoe assembly number 2 and attach the lever followed by number 2 tension return spring. Next add the number 1 shoe assembly and parking brake adjusting screws. Finally connect number 2 shoe assembly. Put the Parking Brake Shoe strut in place, then seat and guide the No. 1 parking brake shoe assembly. Lastly attach its return tension spring. Inspect and install the parking brake for both 2WD and 4WD models before putting on the rear disc and rear disc Brake Caliper. After torqueing the rear wheel at 103 Nm put the No. 1 parking brake cable through the pedal and fasten its clip. You can then add the adjusting nut temporarily to bend the parking brake pedal claw. Finish installation by putting the brake parking control assembly then prepare the brakes for service before testing both adjustment systems.

Related Toyota Highlander Parts

Browse Toyota Highlander Parking Brake Cable by Years

2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001