A person must begin radiator grille removal by unclipping all 11 duct clips from the cool air intake duct and proceeding with the radiator grille disassembly steps. Protective tape should encase the radiator grille before the removal of 2 bolts and 4 clips that separate the 6 claws and 4 guides from the radiator grille design. The radiator grille
Emblem can be separated through the disengagement of its three claws. A plated moulding requires removing the inside radiator grille by pulling out seven screws followed by unclipping nine claws. The upper radiator grille moulding on the left needs its 4 glued claws detached for removal followed by the right side. To remove the left side of the center radiator grille moulding disconnect its 4 claws before completing the same process for the right side. To handle the lower radiator grille moulding workers should start by disengaging its 4 claws on the left side and perform identical steps on the right side.