How to service and repair the A/C Clutch on Toyota Highlander?

The first step in servicing and repairing the compressor clutch demands refrigerant discharge from the refrigeration system. Unfasten bolts A, B and C on the V (cooler compressor to crankshaft pulley) belt No. 1 to remove it. The service proceeds with generator assembly removal after disconnecting cooler hose No. 1 by taking out its nut with O-ring and vinyl-taping both ends to stop moisture and foreign matter intrusion. Continue this hose removal procedure for the cooler refrigerant suction hose No. 1. Disconnect the connector then take out the nut before using an E8 torque socket wrench to extract the stud bolt and then continuing with the three bolts for complete compressor and magnetic clutch separation. Secure the compressor along with magnetic clutch by installing the study bolt and three bolts and nut without overtightening until they achieve solid installation. Start by compressing the compressor's rear side before torquing bolts B, C, A and the nut in succession until completion. Finally reconnect the connector. Apply compressor oil (ND-OIL 8 or equivalent) to the surfaces of the fit and O-ring of cooler refrigerant suction hose No.1 before installing the new O-ring with a torque of 9.8 N.m (100 kgf.cm, 87 in.lbf). Perform this operation again for the cooler refrigerant discharge hose No. 1. After installing the V belt as a temporary step you should put back the generator assembly. The system requires charging of refrigerant followed by engine warm-up before checking for refrigerant loss.

OEM Toyota Highlander A/C Clutch

Air Conditioning Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 A/C Clutches found

View related parts
Toyota Highlander Clutch Assembly
Part Number: 88410-33150
$175.20 MSRP: $250.16
You Save: $74.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor Clutch; Clutch & Pulley; Clutch; Clutch Assembly, Magnet
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Highlander | Base, Limited, SE, Sport | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clutch & Pulley
Part Number: 88410-48100
$136.05 MSRP: $192.60
You Save: $56.55 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2013 Toyota Highlander | Base, Limited, Plus, SE | 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clutch & Pulley
Part Number: 88410-42040
$186.62 MSRP: $266.45
You Save: $79.83 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Replaces: 88410-06080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base | 4 Cyl 2.4 L GAS
View related parts
Toyota Highlander Clutch & Pulley
Part Number: 88410-33140
$202.81 MSRP: $289.57
You Save: $86.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Highlander | Base, Limited, Sport | 6 Cyl 3.3 L GAS
View related parts
Toyota Highlander Clutch Assembly, Magnet
Part Number: 88410-33120
$202.35 MSRP: $288.90
You Save: $86.55 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor Clutch
- Replaces: 88410-07030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base, Limited | 6 Cyl 3.0 L GAS
View related parts
Toyota Highlander Clutch Assembly, Magnet
Part Number: 88410-0N010
$136.05 MSRP: $192.60
You Save: $56.55 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2022 Toyota Highlander | L, LE, LE Plus, Limited, Limited Platinum, Platinum, SE, XLE, XSE | 6 Cyl 3.5 L GAS
View related parts
Toyota Highlander Clutch & Pulley
Part Number: 88410-YC020
$706.66 MSRP: $1035.63
You Save: $328.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch; Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Highlander | Base | 4 Cyl 2.4 L GAS
View related parts
Toyota Highlander Clutch
Part Number: 88410-48030
Product Specifications
- Other Name: Clutch Assembly, Magnet; A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2003 Toyota Highlander | Base | 4 Cyl 2.4 L GAS
View related parts
Toyota Highlander Clutch Assembly, Magnet
Part Number: 88410-33190
Product Specifications
- Other Name: A/C Compressor Clutch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2016 Toyota Highlander | LE, LE Plus, Limited, XLE | 6 Cyl 3.5 L GAS

Toyota Highlander A/C Clutch

If you're thinking about purchasing OEM parts for your Toyota Highlander, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Highlander A/C Clutch at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota Highlander A/C Clutch Parts Questions & Experts Answers

Clutch & Pulley
88410-33140
Q: How to service and repair the A/C Clutch on Toyota Highlander?
A: The first step in servicing and repairing the compressor clutch demands refrigerant discharge from the refrigeration system. Unfasten bolts A, B and C on the V (cooler compressor to crankshaft pulley) belt No. 1 to remove it. The service proceeds with generator assembly removal after disconnecting cooler hose No. 1 by taking out its nut with O-ring and vinyl-taping both ends to stop moisture and foreign matter intrusion. Continue this hose removal procedure for the cooler refrigerant suction hose No. 1. Disconnect the connector then take out the nut before using an E8 torque socket wrench to extract the stud bolt and then continuing with the three bolts for complete compressor and magnetic clutch separation. Secure the compressor along with magnetic clutch by installing the study bolt and three bolts and nut without overtightening until they achieve solid installation. Start by compressing the compressor's rear side before torquing bolts B, C, A and the nut in succession until completion. Finally reconnect the connector. Apply compressor oil (ND-OIL 8 or equivalent) to the surfaces of the fit and O-ring of cooler refrigerant suction hose No.1 before installing the new O-ring with a torque of 9.8 N.m (100 kgf.cm, 87 in.lbf). Perform this operation again for the cooler refrigerant discharge hose No. 1. After installing the V belt as a temporary step you should put back the generator assembly. The system requires charging of refrigerant followed by engine warm-up before checking for refrigerant loss.

Related Toyota Highlander Parts

Browse Toyota Highlander A/C Clutch by Years

2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001