How to install the mud flaps on Toyota FJ Cruiser?

In order to install the mud flaps, use 4 screws (5.0 Nm) with a clip to fasten the quarter panel mudguard. In the case of the front fender mudguard there are 5 screws (5.0 Nm) and a clip. Lastly screw the rear bumper cover in place and plug the cable into the negative battery terminal (3.9 Nm).

How to remove the mud flaps on Toyota FJ Cruiser?

To remove the mud flaps, disconnect the negative battery terminal. Remove the rear bumper cover, then use a clip remover for the front fender mudguard, followed by 5 screws. For the quarter panel mudguard, use a clip remover and remove 4 screws to detach it.

OEM Toyota FJ Cruiser Mud Flaps

Mud Flap Splash Guards

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Mud Flaps found

View related parts
Toyota FJ Cruiser Mud Guard, Rear Driver Side
Part Number: 76608-35101
$32.13 MSRP: $44.73
You Save: $12.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mudguard Sub-Assembly, Rear; Mud Flap, Rear Left; Mudguard, Quarter Panel, Rear Driver Side
- Position: Rear Driver Side
- Replaces: 76608-35100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Mud Guard, Rear Passenger Side
Part Number: 76607-35101
$32.13 MSRP: $44.73
You Save: $12.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mudguard Sub-Assembly, Rear; Mud Flap, Rear Right; Mudguard, Quarter Panel, Rear Passenger Side
- Position: Rear Passenger Side
- Replaces: 76607-35100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Mud Guard, Driver Side
Part Number: 76604-35042
$32.13 MSRP: $44.73
You Save: $12.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mudguard Sub-Assembly, Fender; Mud Flap, Front Left; Mudguard, Front Fender, Driver Side
- Position: Driver Side
- Replaces: 76604-35041, 76604-35040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
View related parts
Toyota FJ Cruiser Mud Guard, Passenger Side
Part Number: 76603-35042
$32.13 MSRP: $44.73
You Save: $12.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mudguard Sub-Assembly, Fender; Mud Flap, Front Right; Mudguard, Front Fender, Passenger Side
- Position: Passenger Side
- Replaces: 76603-35041, 76603-35040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS

Toyota FJ Cruiser Mud Flaps

If you're thinking about purchasing OEM parts for your Toyota FJ Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota FJ Cruiser Mud Flaps at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.

Toyota FJ Cruiser Mud Flaps Parts and Q&A

Mud Guard, Passenger Side
76603-35042
Q: How to install the mud flaps on Toyota FJ Cruiser?
A: In order to install the mud flaps, use 4 screws (5.0 Nm) with a clip to fasten the quarter panel mudguard. In the case of the front fender mudguard there are 5 screws (5.0 Nm) and a clip. Lastly screw the rear bumper cover in place and plug the cable into the negative battery terminal (3.9 Nm).
Mud Guard, Rear Passenger Side
76607-35101
Q: How to remove the mud flaps on Toyota FJ Cruiser?
A: To remove the mud flaps, disconnect the negative battery terminal. Remove the rear bumper cover, then use a clip remover for the front fender mudguard, followed by 5 screws. For the quarter panel mudguard, use a clip remover and remove 4 screws to detach it.