Other Name: Weatherstrip, Front Door; Door Window Belt Weatherstrip, Front Left Outer; Weatherstrip Assembly, Front Door Glass, Outer Driver Side; Weatherstrip
Position: Outer Driver Side
Replaces: 68162-35070, 68162-35071, 68162-35072
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Weatherstrip, Front Door; Door Window Belt Weatherstrip, Front Right Outer; Weatherstrip Assembly, Front Door Glass, Outer Passenger Side; Weatherstrip
Position: Outer Passenger Side
Replaces: 68161-35072, 68161-35070, 68161-35071
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Other Name: Door Seal, Center Left; Weatherstrip; Weatherstrip, Access Panel, Driver Side; Door Seal
Position: Driver Side
Replaces: 67872-35072, 67872-35070, 67872-35071
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2007-2014 Toyota FJ Cruiser | Base, Trail Teams Special Edition, TRD Special Edition | 6 Cyl 4.0 L GAS
Toyota FJ Cruiser Weather Strip
If you're thinking about purchasing OEM parts for your Toyota FJ Cruiser, our website is your one-stop destination. We stock an extensive selection of genuine Toyota FJ Cruiser Weather Strip at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota FJ Cruiser Weather Strip Parts Questions & Experts Answers
Q: How to remove the front door window glass Weather Strip on Toyota FJ Cruiser?
A: The procedure to remove front door window glass Weather Strip starts by disconnecting the negative cable from the battery terminal. The workflow proceeds by removing the front door armrest base upper panel then the front door trim board sub-assembly and finally the front door No. 2 service hole cover for both left-hand and right-hand sides. The installation of the power window regulator master switch for the driver side or the power window regulator switch for the front passenger side will follow by closing the door glass before disconnecting the connector and removing the three bolts from the outer rear view mirror while maintaining caution not to harm the assembly during removal. Protective tape should be applied to the front door panel surrounding the front door glass outer Weather Strip before using a moulding remover to disengage the 8 claws that allow removal of the front door glass outer Weather Strip assembly.