How to remove the front Sway Bars on Toyota Corolla?

The front Sway Bars removal process starts by aligning the front wheels forward and locking down the steering wheel. Begin the procedure by removing the column hole cover silencer sheet after which you should detach the No. 2 steering intermediate shaft assembly then separate the No. 1 steering column hole cover sub-assembly. The next operation requires removing front wheels followed by splitting the tie rod end sub-assemblies from left-hand and right-hand sides. Detach the front sway bar link assembly LH by disassembling its nut then separating it from the front shock absorber with coil spring; apply a 6 mm hexagon wrench to prevent the ball joint from rotating with the nut. The same procedure of connection disassembly should be applied to the front sway bar link assembly RH. The next task involves splitting the front lower suspension arms from both left-hand (LH) and right-hand (RH) sides. You should remove the front Sway Bars only after removing both the front suspension crossmember sub-assembly and the 4 bolts along with 2 No. 1 front sway bar brackets. The removal of 2 No. 1 front sway bar bushings from the front Sway Bars completes this part of the task.

How to install the front Sway Bars and related components on Toyota Corolla?

Installation of the front Sway Bars begins with attaching all elements of 2 front sway bar bushes No. 1 front sway bar bracket No. 1 LH and front sway bar bracket No. 1 RH to the sway bar front at the bushing stopper inner side. After that, position the sway bar front with 4 bolts secured to the front suspension crossmember sub-assembly while tightening them to 19 Nm (194 kgf-cm, 14 ft-lbf). After the front suspension crossmember sub-assembly you must install the rack and pinion power steering gear assembly. After you put the front suspension arm sub-assembly lower No. 1 LH in position you must install the same assembly for the front suspension arm sub-assembly lower No. 1 RH. To install the sway bar link on the front sway bar link assembly LH use 2 nuts tightened at 74 Nm which equals 755 kgf-cm or 55 ft-lbf. If the ball joint rotates with the nut support it with a 6 mm hexagon wrench on the stud. The same installation method must be applied to both the front sway bar link assembly right-hand side. Drill holes into the CV joint end of the front wheel before installing the front wheel while tightening bolts to 103 Nm (1,050 kgf-cm, 76 ft-lbf) and performing necessary alignment checks.

OEM Toyota Corolla Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

42 Sway Bars found

View related parts
Toyota Corolla Stabilizer Bar, Front Part Number: 48811-AB011
$122.54 MSRP: $173.47
You Save: $50.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Suspension Stabilizer Bar Kit; Stabilizer Bar Kit; Sway Bar
- Position: Front
- Replaces: 48811-AB010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2019 Toyota Corolla | 50th Anniversary Special Edition, Base, CE, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XRS, XSE | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Front Part Number: 48811-02330
$107.23 MSRP: $150.52
You Save: $43.29 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 48811-12B00
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2025 Toyota Corolla | FX, Hybrid LE, Hybrid Nightshade, Hybrid SE, Hybrid XLE, L, LE, Nightshade, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Front Part Number: 48811-02340
$117.96 MSRP: $166.98
You Save: $49.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 48811-12B10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | SE, SE Apex, SE Nightshade, XSE, XSE Apex | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48812-02240
$83.65 MSRP: $117.42
You Save: $33.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-12430
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2019 Toyota Corolla | 50th Anniversary Special Edition, Base, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XRS, XSE | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48805-12130
$121.84 MSRP: $172.47
You Save: $50.63 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar; Bar, Stabilizer, Rear
- Manufacturer Note: TIRE&DISC WHEEL-225/40R18 ALL SEASON TIRE ALUMINUM WHEEL
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Corolla | SE, SE Nightshade, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Front Part Number: 48811-02030
$119.72 MSRP: $169.48
You Save: $49.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2002 Toyota Corolla | CE, LE, S, VE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Front Part Number: 48811-12A60
$123.60 MSRP: $174.97
You Save: $51.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 48811-12A00, 48811-12A70
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2013 Toyota Corolla | Base, CE, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48805-12160
$123.95 MSRP: $175.47
You Save: $51.52 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Bar, Stabilizer, Rear
- Manufacturer Note: TIRE&DISC WHEEL-225/40R18 ALL SEASON TIRE ALUMINUM WHEEL
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2025 Toyota Corolla | Nightshade, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Front Part Number: 48811-12B60
$77.49 MSRP: $108.76
You Save: $31.27 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2025 Toyota Corolla | Nightshade, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48812-12490
$82.46 MSRP: $115.75
You Save: $33.29 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Corolla | SE, SE Nightshade, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48812-12170
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-02020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1997 Toyota Corolla | Base, CE, DX, LE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Front Part Number: 48811-12B70
$83.41 MSRP: $117.09
You Save: $33.68 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front
- Manufacturer Note: TIRE&DISC WHEEL-225/40R18 ALL SEASON TIRE ALUMINUM WHEEL
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2025 Toyota Corolla | Nightshade, SE, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48805-02110
$95.38 MSRP: $133.88
You Save: $38.50 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Sway Bar; Bar, Stabilizer, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | Hybrid LE, L, LE, XLE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Front Part Number: 48811-12B20
$99.41 MSRP: $139.54
You Save: $40.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Corolla | SE, SE Nightshade, XSE | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48805-12120
$97.28 MSRP: $136.55
You Save: $39.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Sway Bar; Bar, Stabilizer, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | SE, SE Apex, SE Nightshade, XSE, XSE Apex | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48805-12150
$100.48 MSRP: $141.04
You Save: $40.56 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Bar, Stabilizer, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2025 Toyota Corolla | FX, Hybrid LE, Hybrid Nightshade, Hybrid SE, Hybrid XLE, LE, Nightshade, SE, XSE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48805-02120
$100.24 MSRP: $140.70
You Save: $40.46 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar; Bar, Stabilizer, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Corolla | SE, SE Apex, SE Nightshade, XSE, XSE Apex | 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48812-AB011
$102.73 MSRP: $144.20
You Save: $41.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-AB010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Corolla | CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48805-12110
$104.39 MSRP: $146.52
You Save: $42.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Suspension Stabilizer Bar, Rear; Sway Bar; Bar, Stabilizer, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2025 Toyota Corolla | Hybrid LE, Hybrid XLE, L, LE, XLE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Stabilizer Bar, Rear Part Number: 48805-02210
$118.49 MSRP: $166.32
You Save: $47.83 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar Sub-Assembly, Rear Stabilizer; Bar, Stabilizer, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2025 Toyota Corolla | FX, LE, Nightshade, SE, XSE | 4 Cyl 2.0 L GAS

| Page 1 of 3 |Next >

1-20 of 42 Results

Toyota Corolla Sway Bars

Choose genuine Sway Bars that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Sway Bars for your Toyota Corolla? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Corolla Sway Bars Parts and Q&A

Stabilizer Bar, Front
48811-AB011
Q: How to remove the front Sway Bars on Toyota Corolla?
A:
The front Sway Bars removal process starts by aligning the front wheels forward and locking down the Steering Wheel. Begin the procedure by removing the column hole cover silencer sheet after which you should detach the No. 2 steering intermediate shaft assembly then separate the No. 1 steering column hole cover sub-assembly. The next operation requires removing front wheels followed by splitting the tie rod end sub-assemblies from left-hand and right-hand sides. Detach the front sway bar link assembly LH by disassembling its nut then separating it from the front Shock Absorber with coil spring; apply a 6 mm hexagon wrench to prevent the Ball Joint from rotating with the nut. The same procedure of connection disassembly should be applied to the front sway bar link assembly RH. The next task involves splitting the front lower suspension arms from both left-hand (LH) and right-hand (RH) sides. You should remove the front Sway Bars only after removing both the front suspension crossmember sub-assembly and the 4 bolts along with 2 No. 1 front sway bar brackets. The removal of 2 No. 1 front sway bar bushings from the front Sway Bars completes this part of the task.
Stabilizer Bar, Front
48811-12A60
Q: How to install the front Sway Bars and related components on Toyota Corolla?
A:
Installation of the front Sway Bars begins with attaching all elements of 2 front sway bar bushes No. 1 front sway bar bracket No. 1 LH and front sway bar bracket No. 1 RH to the sway bar front at the bushing stopper inner side. After that, position the sway bar front with 4 bolts secured to the front suspension crossmember sub-assembly while tightening them to 19 Nm (194 kgf-cm, 14 ft-lbf). After the front suspension crossmember sub-assembly you must install the Rack And Pinion power steering gear assembly. After you put the front suspension arm sub-assembly lower No. 1 LH in position you must install the same assembly for the front suspension arm sub-assembly lower No. 1 RH. To install the sway bar link on the front sway bar link assembly LH use 2 nuts tightened at 74 Nm which equals 755 kgf-cm or 55 ft-lbf. If the ball joint rotates with the nut support it with a 6 mm hexagon wrench on the stud. The same installation method must be applied to both the front sway bar link assembly right-hand side. Drill holes into the CV joint end of the front wheel before installing the front wheel while tightening bolts to 103 Nm (1,050 kgf-cm, 76 ft-lbf) and performing necessary alignment checks.