Toyota 48812-02240
Stabilizer Bar, Rear

The first installation step for the rear sway bar kit requires positioning the identification mark on the left side of the vehicle when using the torsion beam type suspension. The installation of the rear sway bar kit should be performed through 2 bolts and 2 nuts with torque set to 250 Nm (2549 kgf-cm, 184 ft-lbf) and the bolts should be inserted through the upper part of the vehicle. You should place the rear axle beam damper at the center region of the rear sway bar kit before assembly. Fasten the rear wheels with a torque of 103 Nm (1050 kgf-cm, 76 ft-lbf).

Secure the rear stabilizer bar using 2 bolts and 2 nuts, ensuring a torque of 250 Nm (2549 kgf-cm, 184 ft-lbf) is applied.

Remove the 2 No. 1 front stabilizer bar bushings from the front stabilizer bar.

Check for any signs of wear or damage, and replace any faulty parts as necessary.