How to remove the camshaft position sensors on Toyota Corolla?

The first step to remove camshaft position sensors for 2ZR-FE engine control involves removing the No. 2 cylinder head cover. Secondly for the exhaust camshaft side remove the duty vacuum switching valve connector and three engine wire harness clamps followed by disconnecting the No. 1 crank position sensor connector to remove the bolt and sensor. The installation of the No. 1 crank position sensor begins by removing its bolt as well as the sensor while simultaneously disconnecting the sensor connector.

How to install the camshaft position sensors on Toyota Corolla?

The installation of 2ZR-FE camshaft position sensors starts by applying light engine oil to the No. 1 crank position sensor O-rings. The No. 1 crank position sensor requires installation along with its bolt through the intake camshaft side for a torque of 10 Nm (102 kgf-cm, 7 ft-lbf) followed by connecting the No. 1 crank position sensor connector. The procedure for installing the No. 1 crank position sensor on the exhaust camshaft requires the same bolt torque followed by sensor connector connection and then harness clamp attachment along with the duty vacuum switching connector. You should inspect for oil leaks before installing the engine under cover RH and then putting on the No. 2 cylinder head cover.

OEM Toyota Corolla Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Camshaft Position Sensors found

View related parts
Toyota Corolla Sensor, Camshaft Position
Part Number: 90080-19014
$69.78 MSRP: $83.30
You Save: $13.52 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Cam Position; Engine Camshaft; Crankshaft; RPM Sensor
- Replaces: 90919-05026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2012 Toyota Corolla | Base, CE, L, LE, S, VE, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Camshaft Position Sensor, Driver Side
Part Number: 90919-T5005
$102.96 MSRP: $144.53
You Save: $41.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor, Left; Crankshaft Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position; Engine Camshaft Position Sensor
- Manufacturer Note: (L)
- Position: Driver Side
- Replaces: 9004A-19003, 90919-05060, 90919-T5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2023 Toyota Corolla | 50th Anniversary Special Edition, Base, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XRS, XSE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Camshaft Position Sensor
Part Number: 90919-05007
$142.99 MSRP: $202.42
You Save: $59.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Engine Camshaft Position Sensor; Cam Position Sensor; Camshaft Sensor; Cam Sensor; Sensor, Cam Position
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Corolla | XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Sensor, Camshaft Position
Part Number: 90919-A5007
$103.20 MSRP: $144.86
You Save: $41.66 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position; Sensor, Cam Position; Engine Camshaft Position Sensor
- Replaces: 90919-05096
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2024 Toyota Corolla | LE, Nightshade, SE, SE Apex, SE Nightshade, XSE, XSE Apex | 4 Cyl 2.0 L GAS

Toyota Corolla Camshaft Position Sensor

Choose genuine Camshaft Position Sensor that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Camshaft Position Sensor for your Toyota Corolla? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Corolla Camshaft Position Sensor Parts and Q&A

Sensor, Camshaft Position
90080-19014
Q: How to remove the camshaft position sensors on Toyota Corolla?
A:
The first step to remove Camshaft position sensors for 2ZR-FE engine control involves removing the No. 2 cylinder head cover. Secondly for the exhaust camshaft side remove the duty vacuum switching valve connector and three engine wire harness clamps followed by disconnecting the No. 1 crank position sensor connector to remove the bolt and sensor. The installation of the No. 1 crank position sensor begins by removing its bolt as well as the sensor while simultaneously disconnecting the sensor connector.
Camshaft Position Sensor, Driver Side
90919-T5005
Q: How to install the camshaft position sensors on Toyota Corolla?
A:
The installation of 2ZR-FE Camshaft position sensors starts by applying light engine oil to the No. 1 crank position sensor O-rings. The No. 1 crank position sensor requires installation along with its bolt through the intake camshaft side for a torque of 10 Nm (102 kgf-cm, 7 ft-lbf) followed by connecting the No. 1 crank position sensor connector. The procedure for installing the No. 1 crank position sensor on the exhaust camshaft requires the same bolt torque followed by sensor connector connection and then harness clamp attachment along with the duty vacuum switching connector. You should inspect for oil leaks before installing the engine under cover RH and then putting on the No. 2 cylinder head cover.