How to remove the rear Brake Line on Toyota Corolla?

Verification marks should be placed on both side rear brake flexible hoses before disconnecting them if you perform the operation at the same time. Start by unmounting the wheel from the rear and purge the brake fluid before cleaning all touched paint surfaces. A union nut wrench (10 mm) will disconnect both brake lines during drum type brake repairs while holding the rear flexible hose with a wrench to proceed by removing the two clips followed by the rear flexible hose. Separate the rear flexible hose from the rear axle beam by removing its bolt for disc based brakes and detach the hose from the rear disc brake cylinder assembly by taking out its union bolt and gasket. To disconnect the brake line you need a 10 mm union nut wrench and should secure the rear flexible hose with a wrench as you remove the brake line. The last step includes removing both the clip and rear flexible hose. Protective measures should be taken to prevent damage to the brake line while avoiding the entry of foreign objects.

How to install the front Brake Line on Toyota Corolla?

The start of front brake flexible hose installation requires verifying that left and right hoses have different part numbers to determine non-interchangeability. Hose connections can proceed after identifying the marks which were present before disconnection. You must start the installation by attaching the front flexible hose to the disc brake cylinder assembly using a new gasket along with the union bolt then torquing it to 29 Nm (296 kgf-cm, 21 ft-lbf). Install a new front flexible hose clip by pushing it to its maximum reach. Apply a 10 mm union nut wrench to connect the brake line to the front flexible hose during which time the technician should use a wrench to support the hose until torque reaches 14 Nm when using the wrench (143 kgf-cm, 10 ft-lbf) or until torque reaches 15 Nm when not using the wrench (155 kgf-cm, 11 ft-lbf). The brake line must remain free from damages and kinks while ensuring complete protection from any foreign entry into the system. To achieve proper torque application the union nut wrench must be parallel with the torque wrench's fulcrum which measures 250 mm (9.84 in.). The front flexible hose needs to be installed onto the absorber bracket by using a bolt with torque setting at 29 Nm (296 kgf-cm, 21 ft-lbf). The speed sensor harness bracket should be installed first. Brake fluid should be added to the reservoir before performing brake line bleeding and inspecting the areas for fluid leakage and checking the fluid amount then installing the front wheel which requires 103 Nm (1050 kgf-cm, 76 ft-lbf) torque.

OEM Toyota Corolla Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

46 Brake Lines found

View related parts
Toyota Corolla Flex Hose
Part Number: 96940-32805
$48.74 MSRP: $67.85
You Save: $19.11 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line; Hose; Hose, Flexible(For Rear Brake Tube); Hose, Flexible(For Front)
- Replaces: 96940-31281, 90947-02346, 96940-30285, 90947-02255, 96940-31285, 96940-32805-86
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1987 Toyota Corolla | Sport DLX, Sport GTS, Sport SR5 | 4 Cyl 1.6 L GAS
View related parts
Toyota Corolla Flex Hose
Part Number: 90947-02532
$95.85 MSRP: $134.55
You Save: $38.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line; Hose, Flexible(For Front)
- Manufacturer Note: *86 & *87
- Replaces: 90080-47023
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1992 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
View related parts
Toyota Corolla Flex Hose, Rear Driver Side
Part Number: 90947-A2024
$66.82 MSRP: $93.80
You Save: $26.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Manufacturer Note: MEXICO SPEC
- Position: Rear Driver Side
- Replaces: 90947-02E80
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2010 Toyota Corolla | XRS | 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Hose, Flexible(For Front), Driver Side
Part Number: 90947-02K98
$65.26 MSRP: $91.60
You Save: $26.34 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Corolla | Hybrid LE, Hybrid SE, Hybrid XLE, LE, Nightshade, SE, XSE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Flex Hose, Passenger Side
Part Number: 90947-A2073
$75.24 MSRP: $105.61
You Save: $30.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hydraulic Line, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Corolla | 50th Anniversary Special Edition, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Flex Hose, Front Driver Side
Part Number: 90947-02912
$75.24 MSRP: $105.61
You Save: $30.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaces: 90080-94104, 90947-02660, 90947-02913, 90080-94038, 90947-02799
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-2002 Toyota Corolla | Base, CE, DX, LE, S, VE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Hose, Flexible(For Front), Passenger Side
Part Number: 90947-A2111
$74.17 MSRP: $104.11
You Save: $29.94 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 90947-02H46
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2023 Toyota Corolla | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Apex, SE Nightshade, XLE, XSE, XSE Apex | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Flex Hose
Part Number: 90947-02541
$83.39 MSRP: $117.06
You Save: $33.67 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line; Hose, Flexible(For Rear Brake Tube)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1991 Toyota Corolla | Base, DLX, DLX All Trac, FX, FX16, FX16 GTS, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
View related parts
Toyota Corolla Flex Hose
Part Number: 90947-02533
$64.31 MSRP: $90.28
You Save: $25.97 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line; Hose, Flexible(For Rear Brake Tube)
- Manufacturer Note: *86 & *87
- Replaces: 90080-47022
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1992 Toyota Corolla | Base, DLX, DLX All Trac, GTS, LE, SR5, SR5 All Trac | 4 Cyl 1.6 L GAS
View related parts
Toyota Corolla Flex Hose, Front Driver Side
Part Number: 90947-A2076
$89.81 MSRP: $126.06
You Save: $36.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hydraulic Line, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Corolla | 50th Anniversary Special Edition, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Flex Hose, Rear Driver Side
Part Number: 90947-A2074
$75.24 MSRP: $105.61
You Save: $30.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hydraulic Line, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Corolla | 50th Anniversary Special Edition, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Flex Hose, Passenger Side
Part Number: 90947-A2023
$71.56 MSRP: $100.45
You Save: $28.89 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Manufacturer Note: MEXICO SPEC
- Position: Passenger Side
- Replaces: 90947-02E79
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2010 Toyota Corolla | XRS | 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Flex Hose
Part Number: 90947-02455
$62.96 MSRP: $88.37
You Save: $25.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Hydraulic Hose; Brake Hose; Brake Line; Hose; Hose, Flexible(For Front)
- Replaces: 90947-02454
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1988 Toyota Corolla | DLX, FX, FX16, FX16 GTS, LE, LE Limited | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L DIESEL
View related parts
Toyota Corolla Flex Hose, Front Passenger Side
Part Number: 90947-A2077
$86.85 MSRP: $121.91
You Save: $35.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front Passenger Side
- Replaces: 90947-02E76, 90947-A2025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Corolla | Base, L, LE, S, XLE, XRS | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Toyota Corolla Flex Hose, Front Passenger Side
Part Number: 90947-02911
$75.24 MSRP: $105.61
You Save: $30.37 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hydraulic Hose; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaces: 90080-94037, 90947-02659, 90080-94103, 90947-02910, 90947-02798
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-2002 Toyota Corolla | Base, CE, DX, LE, S, VE | 4 Cyl 1.6 L GAS, 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Flex Hose, Driver Side
Part Number: 90080-94137
$86.85 MSRP: $121.91
You Save: $35.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Manufacturer Note: LH
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Corolla | CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Flex Hose, Front Passenger Side
Part Number: 90947-A2075
$89.81 MSRP: $126.06
You Save: $36.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hydraulic Line, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Corolla | 50th Anniversary Special Edition, L, LE, LE Eco, Le Eco Plus, S, SE, Special Edition, XLE, XSE | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Flex Hose, Passenger Side
Part Number: 90080-94136
$86.85 MSRP: $121.91
You Save: $35.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Manufacturer Note: RH
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Corolla | CE, LE, S, XRS | 4 Cyl 1.8 L GAS
View related parts
Toyota Corolla Flex Hose, Passenger Side
Part Number: 90947-02K97
$65.26 MSRP: $91.60
You Save: $26.34 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hose; Hose, Flexible(For Front)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023-2024 Toyota Corolla | Hybrid LE, Hybrid SE, Hybrid XLE, LE, Nightshade, SE, XSE | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Toyota Corolla Flex Hose, Passenger Side
Part Number: 90947-02J99
$56.39 MSRP: $78.50
You Save: $22.11 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hose; Hose, Flexible(For Rear Passenger Side)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2023 Toyota Corolla | LE | 4 Cyl 2.0 L GAS

| Page 1 of 3 |Next >

1-20 of 46 Results

Toyota Corolla Brake Line

Choose genuine Brake Line that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Line for your Toyota Corolla? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Corolla parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Corolla Brake Line is an important assembly that serves as the brake fluid hydraulic line from the master cylinder to the brake caliper pistons thus allowing the proper function of the hydraulic brake system. Brake line hoses are made of metal and thus are vulnerable to corrosion and impact injury that causes fluid leakage, besides, the lack of hydraulic pressure. It also similarly poses harm to brake hoses either in its physical condition or as for as the internal structure is concerned, which hampers the braking mechanism. In cases where replacement is required, pre-bent brake line kits and corrosion proof stainless steel hoses are used in the making of the contraption. Braided stainless steel hoses are another considerable step to get even more delicate feelings and reaction of pedals during performance driving conditions.

Toyota Corolla Brake Line Parts and Q&A

Flex Hose, Passenger Side
90947-A2023
Q: How to remove the rear Brake Line on Toyota Corolla?
A:
Verification marks should be placed on both side rear brake flexible hoses before disconnecting them if you perform the operation at the same time. Start by unmounting the wheel from the rear and purge the brake fluid before cleaning all touched paint surfaces. A union nut wrench (10 mm) will disconnect both brake lines during drum type brake repairs while holding the rear flexible hose with a wrench to proceed by removing the two clips followed by the rear flexible hose. Separate the rear flexible hose from the rear axle beam by removing its bolt for disc based brakes and detach the hose from the rear disc brake cylinder assembly by taking out its union bolt and gasket. To disconnect the brake line you need a 10 mm union nut wrench and should secure the rear flexible hose with a wrench as you remove the brake line. The last step includes removing both the clip and rear flexible hose. Protective measures should be taken to prevent damage to the brake line while avoiding the entry of foreign objects.
Flex Hose, Front Driver Side
90947-A2078
Q: How to install the front Brake Line on Toyota Corolla?
A:
The start of front brake flexible hose installation requires verifying that left and right hoses have different part numbers to determine non-interchangeability. Hose connections can proceed after identifying the marks which were present before disconnection. You must start the installation by attaching the front flexible hose to the disc brake cylinder assembly using a new gasket along with the union bolt then torquing it to 29 Nm (296 kgf-cm, 21 ft-lbf). Install a new front flexible hose clip by pushing it to its maximum reach. Apply a 10 mm union nut wrench to connect the brake line to the front flexible hose during which time the technician should use a wrench to support the hose until torque reaches 14 Nm when using the wrench (143 kgf-cm, 10 ft-lbf) or until torque reaches 15 Nm when not using the wrench (155 kgf-cm, 11 ft-lbf). The brake line must remain free from damages and kinks while ensuring complete protection from any foreign entry into the system. To achieve proper torque application the union nut wrench must be parallel with the torque wrench's fulcrum which measures 250 mm (9.84 in.). The front flexible hose needs to be installed onto the absorber bracket by using a bolt with torque setting at 29 Nm (296 kgf-cm, 21 ft-lbf). The speed sensor harness bracket should be installed first. Brake fluid should be added to the reservoir before performing brake line bleeding and inspecting the areas for fluid leakage and checking the fluid amount then installing the front wheel which requires 103 Nm (1050 kgf-cm, 76 ft-lbf) torque.