How to remove the front Sway Bars on Toyota Camry?

Begin Sway Bars removal by disconnecting the cable from the battery terminal then straighten the wheels before their removal. The next step should focus on separating both steering intermediate shaft assembly and tie rod end sub-assembly. The front sway bar link assembly LH requires the removal of its 2 nuts but if the ball joint moves with the nut in place then a 6 mm hexagon wrench should be used to secure the stud. The process for extracting the front sway bar link assembly RH should be repeated. Proceed to remove the engine assembly with transaxle according to the precise instructions for either a 2AZ-FE engine type or a 2GR-FE engine type. The removal process starts by unscrewing the 2 bolts on each of the front frame assembly brackets enjoying the front No. 1 sway bar bracket LH and RH. The procedure requires removal of the front sway bar bushings at the No. 1 locations and finally removing the Sway Bars itself.

How to install the rear Sway Bars and associated components on Toyota Camry?

The first step for installing the rear Sway Bars requires attaching the 2 rear sway bar bushings to the stopper ring located on the outside of the Sway Bars. Installation of the rear Sway Bars should begin with No. 2 bracket then continue with No. 1 bracket installation. Assemble the rear Sway Bars by tightening two bolts on each LN side with a torque value of 31 Nm (316 kgf-cm, 23 ft-lbf) and then do the same for the RH side. Use a 5 mm hexagon wrench to secure the stud if the ball joint turns when tightening the 2 nuts on the rear sway bar link assembly LH. Keep the torque at 39 Nm (398 kgf-cm, 29 ft-lbf). The installation of the rear sway bar link assembly RH requires the same protocol as the LH side. The next step involves installing the center exhaust pipe assembly which corresponds to either the 2AZ-FE or 2GR-FE while the next step requires using the tail exhaust pipe assembly which applies solely to the 2GR-FE. The rear wheels require installation with a torque setting of 103 Nm (1,050 kgf-cm, 76 ft-lbf), followed by complete examination of exhaust gas leaks.

OEM Toyota Camry Sway Bars

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

50 Sway Bars found

View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-06251
$133.94 MSRP: $189.61
You Save: $55.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: TYPE A:REFER ILLUST.
- Position: Front
- Replaces: 48811-06260, 48811-06250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Stabilizer Bar, Rear Part Number: 48812-07010
$125.71 MSRP: $177.96
You Save: $52.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: TRD PACKAGE
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2024 Toyota Camry | TRD, XLE, XSE | 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-07030
$148.74 MSRP: $210.56
You Save: $61.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: TRD PACKAGE
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2025 Toyota Camry | LE, SE, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-AA060
$140.87 MSRP: $199.42
You Save: $58.55 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Stabilizer Bar, Rear Part Number: 48812-06200
$62.91 MSRP: $88.31
You Save: $25.40 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Camry Stabilizer Bar, Rear Part Number: 48812-06170
$86.37 MSRP: $121.24
You Save: $34.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-33240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Camry Stabilizer Bar, Rear Part Number: 48812-06250
$89.10 MSRP: $125.07
You Save: $35.97 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Replaces: 48812-33290
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2025 Toyota Camry | LE, SE, SE Nightshade, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-06241
$112.44 MSRP: $157.84
You Save: $45.40 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 48811-06240
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-06050
$131.59 MSRP: $186.28
You Save: $54.69 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Replaces: 48811-33160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-AA020
$133.94 MSRP: $189.61
You Save: $55.67 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Manufacturer Note: OD=23
- Position: Front
- Replaces: 48811-33130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-33140
$135.94 MSRP: $192.43
You Save: $56.49 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-06150
$145.57 MSRP: $206.07
You Save: $60.50 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | SE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Bar, Stabilizer, Rear Part Number: 48812-33200
$190.70 MSRP: $272.27
You Save: $81.57 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Stabilizer Bar, Rear Part Number: 48812-06140
$66.11 MSRP: $92.80
You Save: $26.69 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Manufacturer Note: MEXICO SPEC
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Camry | L, LE, XLE | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Bar, Stabilizer, Rear Part Number: 48812-AQ010
$72.75 MSRP: $102.11
You Save: $29.36 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BAR, STABILIZER, RR
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2025 Toyota Camry | LE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Camry Bar, Stabilizer, Rear Part Number: 48812-06220
$79.74 MSRP: $111.93
You Save: $32.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2024 Toyota Camry | L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Stabilizer Bar, Rear Part Number: 48812-06210
$81.52 MSRP: $114.42
You Save: $32.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Camry | Hybrid SE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Bar, Stabilizer, Rear Part Number: 48812-06080
$83.18 MSRP: $116.75
You Save: $33.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Position: Rear
- Replaces: 48812-33210
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | Base, CE, LE, XLE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Stabilizer Bar, Front Part Number: 48811-33060
$83.65 MSRP: $117.41
You Save: $33.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Front; Suspension Stabilizer Bar, Front; Sway Bar
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS
View related parts
Toyota Camry Bar, Stabilizer, Front Part Number: 48811-33080
$83.77 MSRP: $117.59
You Save: $33.82 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sway Bar
- Manufacturer Note: (J)
- Position: Front
- Replaces: 48811-07010, 48811-AA070, 48811-AC020, 48811-06070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2003 Toyota Camry | CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 3 |Next >

1-20 of 50 Results

Toyota Camry Sway Bars

Choose genuine Sway Bars that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Sway Bars for your Toyota Camry? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Camry Sway Bars attach the suspension and wheels on different sides of the vehicle to increase the roll stiffness to enhance traction, handling, and tire load balance. Sway Bars are also torsion levers on any model of the Toyota Camry. When one of the wheels lifts up, the bar will bend and push the other wheel to do the same, preventing excessive body lean. This will ensure that the distribution of weight throughout the Toyota tires is more balanced, thus enabling constant cornering and control in day-to-day driving. The Sway Bars are made in various diameters, with thicker ones offering more cornering force and slimmer ones offering milder support for street use. Camry has a fixed solid bar that is not electronically controlled and relies on metal rigidity and bushings to counter roll. Toyota Camry Sway Bars that are operating properly also contribute to the reduction of uneven tire wear because lateral forces are distributed by them. Sway Bars are a significant component of the vehicle stability system.

Toyota Camry Sway Bars Parts and Q&A

Stabilizer Bar, Front
48811-06150
Q: How to remove the front Sway Bars on Toyota Camry?
A:
Begin Sway Bars removal by disconnecting the cable from the battery terminal then straighten the wheels before their removal. The next step should focus on separating both steering intermediate shaft assembly and tie rod end sub-assembly. The front sway bar link assembly LH requires the removal of its 2 nuts but if the Ball Joint moves with the nut in place then a 6 mm hexagon wrench should be used to secure the stud. The process for extracting the front sway bar link assembly RH should be repeated. Proceed to remove the engine assembly with transaxle according to the precise instructions for either a 2AZ-FE engine type or a 2GR-FE engine type. The removal process starts by unscrewing the 2 bolts on each of the front frame assembly brackets enjoying the front No. 1 sway bar bracket LH and RH. The procedure requires removal of the front sway bar bushings at the No. 1 locations and finally removing the Sway Bars itself.
Stabilizer Bar, Rear
48812-06090
Q: How to install the rear Sway Bars and associated components on Toyota Camry?
A:
The first step for installing the rear Sway Bars requires attaching the 2 rear sway bar bushings to the stopper ring located on the outside of the Sway Bars. Installation of the rear Sway Bars should begin with No. 2 bracket then continue with No. 1 bracket installation. Assemble the rear Sway Bars by tightening two bolts on each LN side with a torque value of 31 Nm (316 kgf-cm, 23 ft-lbf) and then do the same for the RH side. Use a 5 mm hexagon wrench to secure the stud if the ball joint turns when tightening the 2 nuts on the rear sway bar link assembly LH. Keep the torque at 39 Nm (398 kgf-cm, 29 ft-lbf). The installation of the rear sway bar link assembly RH requires the same protocol as the LH side. The next step involves installing the center Exhaust Pipe assembly which corresponds to either the 2AZ-FE or 2GR-FE while the next step requires using the tail exhaust pipe assembly which applies solely to the 2GR-FE. The rear wheels require installation with a torque setting of 103 Nm (1,050 kgf-cm, 76 ft-lbf), followed by complete examination of exhaust gas leaks.