Other Name: Cylinder Assembly, Disc; Brake Caliper
Position: Passenger Side
Replaces: 47730-33010, 47730-20260
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1987-1999 Toyota Camry | Base, CE, DLX, DLX All Trac, DX, LE, LE All Trac, SE, XLE | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
Other Name: Cylinder Assembly, Disc; Brake Caliper
Position: Rear Driver Side
Replaces: 47750-20260, 47750-33010
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
1987-1999 Toyota Camry | Base, CE, DLX, DLX All Trac, DX, LE, LE All Trac, SE, XLE | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Left; Caliper; Cylinder Assembly, Disc Brake, Driver Side; Brake Caliper
Position: Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2018-2019 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Brake Caliper; Cylinder Assembly, Front Disc Brake, Passenger Side
Position: Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2018-2019 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2000-2003 Toyota Camry | CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
| Page 1 of 4 |Next >
1-20 of 67 Results
Toyota Camry Brake Caliper
If you're thinking about purchasing OEM parts for your Toyota Camry, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry Brake Caliper at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Toyota Camry Brake Caliper Parts Questions & Experts Answers
Q: How to service and repair the brake caliper on Toyota Camry?
A: You should start with removing the rear wheel after tightening it to 103 Nm (1.050 kgf-cm, 76 ft. lbs.). Begin the brake caliper service by disconnecting the flexible hose by unscrewing the union bolt and removing the 2 gaskets on the caliper then detach the hose following up with a torque of 29 Nm (300 kgf-cm, 21 ft. lbs.). A container should be used for collecting the draining brake fluid. Dismantle the caliper by backing out its installation bolt at 20 Nm torque (200 kgf-cm or 14 ft. lbs.) and unfasten the caliper from the torque plate. Remove the two brake pads together with four anti-squeal shims followed by the removal of four pad support plates so that the pads and disc friction surfaces remain free of oil and grease for installation. Unfasten the main pin bolt till it reaches 26 Nm (270 kgf-cm, 20 ft. lbs.) while removing the main pin. You should follow the uninstallation process in reverse order while adding brake fluid that will enable system bleeding before inspecting for leaks.