How to replace the front Brake Pads on Toyota Camry?

The first step for front brake pad replacement requires front wheel removal followed by disc mounting with hub nuts. Check pad lining thickness through the caliper inspection hole until you find pad replacement is necessary when maximum thickness reaches 1.0 mm (0.039 inch). The caliper lift requires bolt and flexible hose removal from the bracket; 5S-FE engine customers should loosen the installation bolt by holding their sliding pin then removing it and bottom side installation bolt removal is required for the 1MZ-FE engine. Securely hang up the caliper by maintaining attachment to its flexible hose. For the 5S-FE engine you must first remove its two anti-squeal springs before removing the two brake pads together with their four anti-squeal shims. The pad wear indicator plate and 2 pad support plates must be removed from the 1MZ-FE engine while you need to remove 4 pad support plates when working on the 5S-FE engine. The anti-squeal springs together with support plates can be reused when they remain undamaged, uncracked, and unworn and remain free from rust or dirt. The disc runout and thickness should be checked before installing the new pads with two or four pad support plates. The anti-squeal shims and wear indicator plates must be replaced alongside the pads. When installing the pad wear indicator plate to the inner pad of the 1MZ-FE engine, apply disc brake grease to both sides of the inner anti-squeal shims before installing 2 anti-squeal shims to each pad. Position the inner pad upward by setting its wear indicator plate then put the outer pad into place without any lubricants on the braking surfaces. Two anti-squeal springs need installation on the CAFE engine. Using a hammer handle push the piston into the caliper after drawing a small amount of fluid from the reservoir. The process may require releasing the bleeder plug to avoid resistance. The CAFE engine requires slider pin maintenance when installing the caliper bolt with 34 Nm torque while the 1MZ-FE engine demands 34 Nm torque. Also install the flexible hose and bracket bolt before completing the torquing to 29 Nm levels for both engines. End the brake line installation by placing the front wheel then twisting until reaching 103 Nm (1,050 kgf-cm, 76 ft. lbs.) torque while also pressing the brake pedal multiple times before confirming fluid at the max line.

How to replace the rear Brake Pads on Toyota Camry?

Wheels and hub nuts need to be removed from the rear wheel so the disc can be fastened before you start replacing brake pads. First check the pad lining thickness through the caliper inspection hole to ensure 1.0 mm (0.039 inch) minimum standard; install new pads when this criterion is not met. You can lift the caliper through the removal of its bottom side slide pin before safely suspending it but leaving the flexible hose connected. Vehicle owners should discard two brake pads with four anti-squeal shims if their vehicle is TMMK made, and such vehicles built by TMC need two brake pads with two anti-squeal shims. Then remove the pad wear indicator but keep the 4 pad support plates if they remain free of damage, signs of wear and rust and dirt contamination. It is necessary to check disc thickness and runout before installing the 4 pad support plates. The installation of new pads requires new anti-squeal shims too; TMMK made vehicles need disc brake grease on both sides of the inner anti-squeal shims before their placement onto each pad with the wear indicator plates facing downward. The pads and disc must have all traces of oil and grease removed from their friction contact points. The caliper installation method consists of drawing enough brake fluid from the reservoir followed by pressing the piston with a hammer hand or equivalent tool (the bleeder plug needs loosening if pressing the piston becomes challenging) before putting in the caliper and the slide pin with lithium soap base glycol grease on the slide pin. Secure the flexible hose and bolt to its bracket by applying either 43 Nm torque for TMMK vehicles or 34 Nm torque for TMC vehicles. When done with installation torque the rear wheel to 103 Nm (1.050 kgf-cm, 76 ft. lbs.) then depress the brake pedal several times and verify the fluid level reaches the max line.

OEM Toyota Camry Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

31 Brake Pads found

View related parts
Toyota Camry Brake Pads, Front Part Number: 04465-07010
$76.07 MSRP: $105.63
You Save: $29.56 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Manufacturer Note: MARK NBK D6911H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2017 Toyota Camry | Base, Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Brake Pads, Rear Part Number: 04466-06200
$51.98 MSRP: $72.00
You Save: $20.02 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK NBK D6247
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2012-2017 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Sport, Special Edition, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Brake Pads, Front Part Number: 04465-0E060
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Manufacturer Note: MARK NBK D6994H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2023 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Brake Pads, Rear Part Number: 04466-33210
$51.98 MSRP: $72.00
You Save: $20.02 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK AK NS542
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2024 Toyota Camry | L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Brake Pads, Front Part Number: 04465-08030
$76.07 MSRP: $105.63
You Save: $29.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Manufacturer Note: MARK SELP PS558H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Pad Kit, Disc Brake, Rear Part Number: 04466-06090
$56.15 MSRP: $77.78
You Save: $21.63 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARK NBK D6247
- Position: Rear
- Replaces: 04466-33180, 04466-06060, 04466-33160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Pad Kit, Disc Brake, Front Part Number: 04465-06100
$76.07 MSRP: $105.63
You Save: $29.56 (28%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARK NBK PN562H
- Position: Front
- Replaces: 04465-33450, 04465-06070, 04465-33440
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2011 Toyota Camry | Base, CE, Hybrid, LE, SE, XLE | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Pad Kit, Disc Brake, Front Part Number: 04465-33480
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARK NBK D6994H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2019 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Brake Pads, Rear Part Number: 04466-0E070
$51.98 MSRP: $72.00
You Save: $20.02 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK AK NS554
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2018-2025 Toyota Camry | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Camry Brake Pads, Rear Part Number: 04466-06030
$57.23 MSRP: $79.27
You Save: $22.04 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK AK PA561
- Position: Rear
- Replaces: 04466-33080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Pad Kit, Disc Brake, Front Part Number: 04465-33121
$76.89 MSRP: $106.79
You Save: $29.90 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARK AK PA533
- Position: Front
- Replaces: 04465-33120
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-2003 Toyota Camry | CE, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Pad Kit, Disc Brake Part Number: 04466-32050
$46.47 MSRP: $64.61
You Save: $18.14 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Disc Brake Pad Set; Brake Pads
- Replaces: 04492-20061, 04491-33070, 04492-20100, 04492-32080, 04492-32070, 04492-32061, 04492-33010, 04466-32010, 04492-20090, 04492-33020, 04492-20062
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1999 Toyota Camry | Base, CE, DLX, DLX All Trac, DX, LE, LE All Trac, SE, XLE | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Brake Pads, Front Part Number: 04465-33350
$82.82 MSRP: $115.02
You Save: $32.20 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Pad Kit; Disc Brake Pad Set; Front Pads; Pad Kit, Disc Brake, Front
- Manufacturer Note: MARK SUMITOMO PS558H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Brake Pads, Rear Part Number: 04466-33040
$46.47 MSRP: $64.61
You Save: $18.14 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Brake Pads, Front Part Number: 04465-33240
$76.07 MSRP: $105.63
You Save: $29.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Manufacturer Note: MARK AK PA533
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Brake Pads, Rear Part Number: 04466-33140
$52.57 MSRP: $72.80
You Save: $20.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Rear Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK AK PA561
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2006 Toyota Camry | Base, LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Pad Kit, Disc Brake, Front Part Number: 04465-33060
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARD AKEBONO PA533A
- Position: Front
- Replaces: 04465-06020, 04491-06020, 04491-07010, 04465-33010, 04491-33021, 04491-33020, 04491-33110, 04491-33100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1996 Toyota Camry | DLX, DX, LE, SE, XLE | 6 Cyl 3.0 L GAS
View related parts
Toyota Camry Brake Pads, Front Part Number: 04465-33210
$76.07 MSRP: $105.63
You Save: $29.56 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Brake Pad Set, Disc Brake; Disc Brake Pad Kit; Front Pads; Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Manufacturer Note: W(14 INCHES DISC WHEEL)
- Position: Front
- Replaces: 04465-33090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-2000 Toyota Camry | CE, DLX, DX, LE, SE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS
View related parts
Toyota Camry Pad Kit, Disc Brake, Rear Part Number: 04466-33090
$52.57 MSRP: $72.80
You Save: $20.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARK AK PA544
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2004 Toyota Camry | LE, SE, XLE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Toyota Camry Brake Pads, Front Part Number: 04465-33220
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001 Toyota Camry | CE, LE, XLE | 4 Cyl 2.2 L CNG, 4 Cyl 2.2 L GAS

| Page 1 of 2 |Next >

1-20 of 31 Results

Toyota Camry Brake Pads

Choose genuine Brake Pads that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Pads for your Toyota Camry? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Camry parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Toyota Camry Brake Pads aid in transforming a moving sedan's kinetic energy into heat through friction with the brake rotors to stop the vehicle. Every brake pad has a steel backing plate that is bonded to a friction material. When a caliper exerts hydraulic pressure, that material presses against the rotor. The two Brake Pads work with any rotor so the clamping action quickly rises to increase friction until motion stops. Due to the intensity of this friction, Brake Pads gradually erode, and a built-in indicator lets the driver know when replacement is due. The owner of a Toyota Camry can expect to have scheduled maintenance carried out periodically, usually near the mileage intervals advised in the handbooks. Various materials can be utilized, including non-metallic, semi-metallic, fully metallic, and ceramic, which provide various levels of stopping power, noise and wear characteristics. Brake Pads for a Toyota Camry are engineered to lessen brake fade and perform reliably after many more brake applications, regardless of composition. Break disc systems became more common after racing proved their advantages over drum systems. Brake Pads in Toyota Camry assemblies help ensure effective braking by matching rotor surfaces.

Toyota Camry Brake Pads Parts and Q&A

Pad Kit, Disc Brake, Front
04465-33121
Q: How to replace the front Brake Pads on Toyota Camry?
A:
The first step for front brake pad replacement requires front wheel removal followed by disc mounting with hub nuts. Check pad lining thickness through the caliper inspection hole until you find pad replacement is necessary when maximum thickness reaches 1.0 mm (0.039 inch). The caliper lift requires bolt and flexible hose removal from the bracket; 5S-FE engine customers should loosen the installation bolt by holding their sliding pin then removing it and bottom side installation bolt removal is required for the 1MZ-FE engine. Securely hang up the caliper by maintaining attachment to its flexible hose. For the 5S-FE engine you must first remove its two anti-squeal springs before removing the two brake pads together with their four anti-squeal shims. The pad wear indicator plate and 2 pad support plates must be removed from the 1MZ-FE engine while you need to remove 4 pad support plates when working on the 5S-FE engine. The anti-squeal springs together with support plates can be reused when they remain undamaged, uncracked, and unworn and remain free from rust or dirt. The disc runout and thickness should be checked before installing the new pads with two or four pad support plates. The anti-squeal shims and wear indicator plates must be replaced alongside the pads. When installing the pad wear indicator plate to the inner pad of the 1MZ-FE engine, apply disc brake grease to both sides of the inner anti-squeal shims before installing 2 anti-squeal shims to each pad. Position the inner pad upward by setting its wear indicator plate then put the outer pad into place without any lubricants on the braking surfaces. Two anti-squeal springs need installation on the CAFE engine. Using a hammer handle push the piston into the caliper after drawing a small amount of fluid from the reservoir. The process may require releasing the bleeder plug to avoid resistance. The CAFE engine requires slider pin maintenance when installing the caliper bolt with 34 Nm torque while the 1MZ-FE engine demands 34 Nm torque. Also install the flexible hose and bracket bolt before completing the torquing to 29 Nm levels for both engines. End the brake line installation by placing the front wheel then twisting until reaching 103 Nm (1,050 kgf-cm, 76 ft. lbs.) torque while also pressing the brake pedal multiple times before confirming fluid at the max line.
Brake Pads, Rear
04466-33060
Q: How to replace the rear Brake Pads on Toyota Camry?
A:
Wheels and hub nuts need to be removed from the rear wheel so the disc can be fastened before you start replacing brake pads. First check the pad lining thickness through the caliper inspection hole to ensure 1.0 mm (0.039 inch) minimum standard; install new pads when this criterion is not met. You can lift the caliper through the removal of its bottom side slide pin before safely suspending it but leaving the flexible hose connected. Vehicle owners should discard two brake pads with four anti-squeal shims if their vehicle is TMMK made, and such vehicles built by TMC need two brake pads with two anti-squeal shims. Then remove the pad wear indicator but keep the 4 pad support plates if they remain free of damage, signs of wear and rust and dirt contamination. It is necessary to check disc thickness and runout before installing the 4 pad support plates. The installation of new pads requires new anti-squeal shims too; TMMK made vehicles need disc brake grease on both sides of the inner anti-squeal shims before their placement onto each pad with the wear indicator plates facing downward. The pads and disc must have all traces of oil and grease removed from their friction contact points. The caliper installation method consists of drawing enough brake fluid from the reservoir followed by pressing the piston with a hammer hand or equivalent tool (the bleeder plug needs loosening if pressing the piston becomes challenging) before putting in the caliper and the slide pin with lithium soap base glycol grease on the slide pin. Secure the flexible hose and bolt to its bracket by applying either 43 Nm torque for TMMK vehicles or 34 Nm torque for TMC vehicles. When done with installation torque the rear wheel to 103 Nm (1.050 kgf-cm, 76 ft. lbs.) then depress the brake pedal several times and verify the fluid level reaches the max line.

Related Toyota Camry Parts

Browse Toyota Camry Brake Pads by Years

2025 2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984

OEM Toyota Camry Brake Pads

31 Brake Pads found

Toyota Camry Brake Pads, Front Part Number: 04465-07010

Toyota Camry Brake Pads, Rear Part Number: 04466-06200

Toyota Camry Brake Pads, Front Part Number: 04465-0E060

Toyota Camry Brake Pads, Rear Part Number: 04466-33210

Toyota Camry Brake Pads, Front Part Number: 04465-08030

Toyota Camry Pad Kit, Disc Brake, Rear Part Number: 04466-06090

Toyota Camry Pad Kit, Disc Brake, Front Part Number: 04465-06100

Toyota Camry Pad Kit, Disc Brake, Front Part Number: 04465-33480

Toyota Camry Brake Pads, Rear Part Number: 04466-0E070

Toyota Camry Brake Pads, Rear Part Number: 04466-06030

Toyota Camry Pad Kit, Disc Brake, Front Part Number: 04465-33121

Toyota Camry Pad Kit, Disc Brake Part Number: 04466-32050

Toyota Camry Brake Pads, Front Part Number: 04465-33350

Toyota Camry Brake Pads, Rear Part Number: 04466-33040

Toyota Camry Brake Pads, Front Part Number: 04465-33240

Toyota Camry Brake Pads, Rear Part Number: 04466-33140

Toyota Camry Pad Kit, Disc Brake, Front Part Number: 04465-33060

Toyota Camry Brake Pads, Front Part Number: 04465-33210

Toyota Camry Pad Kit, Disc Brake, Rear Part Number: 04466-33090

Toyota Camry Brake Pads, Front Part Number: 04465-33220

Toyota Camry Brake Pads

Toyota Camry Brake Pads Parts and Q&A

Related Toyota Camry Parts

Browse Toyota Camry Brake Pads by Years