Other Name: Lamp Assembly, Rear Combination; Tail Light Assembly, Rear Right Outer; Back Up Light; Tail Lamps; Lamp Assembly, Rear Combination, Passenger Side; Tail Light Assembly; Tail Light
Position: Passenger Side
Fits the following Toyota Models:
Highlander | 2018-2019 | Hybrid LE, Hybrid Limited, Hybrid Limited Platinum, Hybrid XLE, LE, LE Plus, Limited, Limited Platinum, SE, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Other Name: Lamp Assembly, Rear, Right-Hand; Back Up Light Assembly, Rear Right; Tail Light Assembly; Other Lamp; Lamp Assembly, Rear, Passenger Side; Back Up Light
Position: Passenger Side
Fits the following Toyota Models:
Highlander | 2020-2023 | Hybrid Bronze Edition, Hybrid LE, Hybrid Limited, Hybrid Platinum, Hybrid XLE, L, LE, Limited, Platinum, XLE, XSE | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS
Camry | 2021-2024 | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Lamp Assembly, Rear Combination; Tail Light Assembly, Rear Right; Back Up Light; Tail Lamps; Lamp Assembly, Rear Combination, Passenger Side; Tail Light Assembly; Tail Light
Manufacturer Note: TRD PACKAGE
Position: Passenger Side
Fits the following Toyota Models:
Camry | 2018-2020 | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Camry | 2021-2024 | Hybrid LE, Hybrid SE, Hybrid SE Nightshade, Hybrid XLE, Hybrid XSE, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Other Name: Lamp Assembly, Rear Combination; Tail Light Assembly, Rear Left; Back Up Light; Tail Lamps; Lamp Assembly, Rear Combination, Driver Side; Tail Light Assembly; Tail Light
Manufacturer Note: TRD PACKAGE
Position: Driver Side
Fits the following Toyota Models:
Camry | 2018-2020 | Hybrid LE, Hybrid SE, Hybrid XLE, L, LE, SE, SE Nightshade, TRD, XLE, XSE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.5 L GAS
Q: How to service and repair the Back Up Light on Toyota FJ Cruiser?
A: Start by detaching the rear combination light gasket then replace it with a new one whenever it adheres to the body as part of the Back Up Light service and repair process. You should start by following instructions to remove the tail and stop light bulb through a combination of turning the rear combination light socket and bulb in the indicated direction followed by taking out the bulb from its socket. The step for removing both back up and rear turn signal light bulbs follows the same method by turning sockets and bulbs in proper directions followed by bulb extraction from the sockets.
Q: How can you replace the Back Up Light assembly on Toyota Land Cruiser?
A: The Back Up light assembly removal begins with taking out the left-hand rear light assembly by disconnecting its connector and removing three nuts to detach the clip before removing the rear light.
Q: How to service the Back Up Light on Toyota Sienna?
A: Service of the Back Up Light requires starting with the back door garnish center followed by left and right back door side garnish removal and subsequent removal of the back door strap cover subassembly along with the back door pull strap. The first step requires disconnecting the connector after which you can remove the back door trim board assembly together with the Back Up light assembly through releasing the 2 claw fittings followed by removing the 4 nuts. Connectors must be installed before securing the Back Up light assembly by using 4 nuts and 2 claws. First install the back door pull strap after which you must replace the back door side garnish both right and left sides followed by the back door strap cover and back door trim board assembly and lastly attach the back door garnish center.