Other Name: Lamp Assembly, Rear, Left-Hand; Back Up Light Assembly, Rear Left; Tail Light Assembly; Other Lamp; Lamp Assembly, Rear, Driver Side; Back Up Light
Position: Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2011-2020 Toyota Sienna | SE, SE Premium | 6 Cyl 3.5 L GAS
Other Name: Lamp Assembly, Rear, Left-Hand; Back Up Light Assembly, Rear Left; Tail Light Assembly; Other Lamp; Lamp Assembly, Rear, Driver Side; Back Up Light
Position: Driver Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2011 Toyota Sienna | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
Other Name: Lamp Assembly, Rear, Right-Hand; Back Up Light Assembly, Rear Right; Tail Light Assembly; Other Lamp; Lamp Assembly, Rear, Passenger Side; Back Up Light
Position: Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2011-2020 Toyota Sienna | SE, SE Premium | 6 Cyl 3.5 L GAS
Other Name: Lamp Assembly, Back-Up; Back Up Light Assembly, Rear Left; Tail Light Lens; Tail Light; Combination Lamp Assy; Lamp Assembly, Back Up, Driver Side; Back Up Light
Position: Driver Side
Replaces: 81681-08020
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2001-2003 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.0 L GAS
Other Name: Lamp Assembly, Rear, Right-Hand; Lamp Assembly, Rear, Passenger Side
Position: Passenger Side
Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
Fits the following Vehicles:
2023 Toyota Sienna | LE, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
| Page 1 of 3 |Next >
1-20 of 46 Results
Toyota Sienna Back Up Light
If you're thinking about purchasing OEM parts for your Toyota Sienna, our website is your one-stop destination. We stock an extensive selection of genuine Toyota Sienna Back Up Light at pocket-friendly prices. Plus, we guarantee a swift delivery and a hassle-free return policy for your convenience.
Q: How to properly remove and install the Back Up Light on Toyota Sienna?
A: To loosen the Back Up Light Assembly, disconnect the back door garnish center, side garnishes, strap cover and pull strap. Take out the assembly by removing the trim board, disconnecting the connector and removing the claws. Installing Reverse the steps and make everything stuck.
Q: How to service and repair the Back Up Light on Toyota Sienna?
A: To service the Back Up Light, start by taking out the bulb. Once removed, reinstall the bulb to complete the reassembly. Repeat the installation to confirm it functions correctly.