How to replace a Wheel Stud on the Front Axle on Toyota 4Runner?

The process starts by disconnecting the brake tube with Special Service Tool: 00902-00100 to free the front wheel and Front Axle LH Wheel Stud while removing its 2 bolts securing the caliper assembly. Install the front axle LH wheel stud replacement using Special Service Tool: 09611-12010 along with a screwdriver to accomplish the task. You should install a new wheel stud through the axle hub while adding the washer plate and then securely tighten the hub nut. Insert the front disc along with the front disc brake caliper assembly LH while tightening its bolts to 123 Nm (1,254 kgf-cm, 91 ft. lbs.). The disc brake caliper assembly requires the brake tube attachment via Special Service Tool: 09023-00100 while maintaining 15 Nm (155 kgf-cm) torque. After bleed procedure complete the brake line inspection and reservoir fluid check while searching for fluid leakage before tightening the front wheel to 112 Nm (1,142 kgf-cm, 83 ft. lbs.).

How to service the rear Wheel Stud on Toyota 4Runner?

Setting up to work on the rear wheel stud starts with removing the rear wheel plus the rear speed sensor before splitting the rear disc brake caliper set and taking out the rear disc. Remove the parking brake shoe return tension spring, parking brake shoe strut compression spring, parking brake shoe strut, and parking brake shoe next. A technician should apply tool 09650-17011 to remove the rear wheel stud. Route a new stud into the axle hub space and place a washer plate next before tightening the hub nut. Put back the parking brake shoe and its supporting parts namely the parking brake shoe strut, strut compression spring, and shoe return tension spring. Put back the rear disc and attach the rear disc brake caliper assembly before connecting the rear speed sensor. Set the reservoir with brake fluid and bleed the brake line while checking brake fluid levels inside the reservoir and searching for fluid leaks. After fitting the rear wheel adjust its travel distance. Also confirm that the ABS speed sensor signal is working correctly.

OEM Toyota 4Runner Wheel Stud

Rim Wheel Stud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Studs found

View related parts
Toyota 4Runner Wheel Stud
Part Number: 90942-02082
$4.17 MSRP: $5.81
You Save: $1.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Wheel Lug Stud, Front, Rear; Wheel Hub Repair Kit; Wheel Hub Bolt; Wheel Bolt; Hub Assembly Wheel Stud; Standard Parts; Wheel Lug Stud for all axle positions.
- Replaces: 90942-02049, 90942-02017, 90942-02037, 90942-02070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-2023 Toyota 4Runner | 40th Anniversary Edition, Base, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.4 L GAS, 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Hub Assembly, Front
Part Number: 43503-29085
$303.24 MSRP: $432.95
You Save: $129.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub Repair Kit; Wheel Hub; Front Hub
- Position: Front
- Replaces: 43503-26020, 43503-26030, 43503-29015
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1994-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Hub Assembly, Front
Part Number: 43502-29095
$258.15 MSRP: $368.58
You Save: $110.43 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Sub-Assembly, Front Axle; Wheel Hub Repair Kit; Wheel Hub; Front Hub; Rotor Hub; Hub
- Position: Front
- Replaces: 43511-39015, 43511-35905, 43511-35904
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1995 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Wheel Stud, Rear
Part Number: 90942-02079
$6.44 MSRP: $8.96
You Save: $2.52 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Wheel Lug Stud, Rear; Wheel Bearing Bolt; Wheel Hub Repair Kit; Wheel Hub Bolt; Wheel Bolt; Hub & Bearing Wheel Stud; Hub & Bearing Bolt; Rear Axle Hub Bolts; Wheel Lug Stud
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2023 Toyota 4Runner | 40th Anniversary Edition, Base, Limited, Nightshade, Sport, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Wheel Stud, Rear
Part Number: 90942-02052
$7.04 MSRP: $9.80
You Save: $2.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt, Hub; Wheel Lug Stud, Rear; Wheel Hub Repair Kit; Wheel Hub Bolt; Wheel Bolt; Hub & Bearing Bolt; Rear Axle Hub Bolts for Passenger/Driver Side; Wheel Lug Stud.
- Position: Rear
- Replaces: 90942-02034
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-1999 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

Toyota 4Runner Wheel Stud

Choose genuine Wheel Stud that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Wheel Stud for your Toyota 4Runner? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

A Wheel Stud for Toyota 4Runner stands as a vital component responsible for promoting the reliable performance of the Toyota 4Runner vehicle. As the crucial holding device the Wheel Stud maintains the wheel-hub connection which produces both stability and operational safety. Made from steel or carbon steel materials the durable Wheel Stud satisfies demanding driving environments to deliver trustworthy service to Toyota 4Runner drivers. The Wheel Stud matches different Toyota 4Runner models throughout all generations because it remains a permanent feature between all versions of the lineup. The vehicle needs periodic inspection of Wheel Stud because broken or worn components produce safety threats that impact both vehicle performance and driving security. The automotive market recognizes the Toyota 4Runner Wheel Stud through its semi-permanent mounting on the hub so the component stays attached even when the vehicle is under maintenance. Alongside the manufacturer's reputation for vehicle longevity this vital feature highlights why Wheel Stud plays an essential role in improving driving quality. The part of brand model remains a vital component for every enthusiast because this vehicle ranks among the extended lasting cars alongside showing the automaker's dedication to performance and quality craftsmanship.

Toyota 4Runner Wheel Stud Parts and Q&A

Wheel Stud
90942-02082
Q: How to replace a Wheel Stud on the Front Axle on Toyota 4Runner?
A:
The process starts by disconnecting the brake tube with Special Service Tool: 00902-00100 to free the front wheel and Front Axle LH Wheel Stud while removing its 2 bolts securing the caliper assembly. Install the front axle LH wheel stud replacement using Special Service Tool: 09611-12010 along with a screwdriver to accomplish the task. You should install a new wheel stud through the axle hub while adding the washer plate and then securely tighten the hub nut. Insert the front disc along with the front disc Brake Caliper assembly LH while tightening its bolts to 123 Nm (1,254 kgf-cm, 91 ft. lbs.). The disc brake caliper assembly requires the brake tube attachment via Special Service Tool: 09023-00100 while maintaining 15 Nm (155 kgf-cm) torque. After bleed procedure complete the brake line inspection and reservoir fluid check while searching for fluid leakage before tightening the front wheel to 112 Nm (1,142 kgf-cm, 83 ft. lbs.).
Wheel Stud, Rear
90942-02079
Q: How to service the rear Wheel Stud on Toyota 4Runner?
A:
Setting up to work on the rear wheel stud starts with removing the rear wheel plus the rear Speed Sensor before splitting the rear disc Brake Caliper set and taking out the rear disc. Remove the Parking Brake Shoe return tension spring, parking brake shoe strut compression spring, parking brake shoe strut, and parking brake shoe next. A technician should apply tool 09650-17011 to remove the rear wheel stud. Route a new stud into the axle hub space and place a washer plate next before tightening the hub nut. Put back the parking brake shoe and its supporting parts namely the parking brake shoe strut, strut compression spring, and shoe return tension spring. Put back the rear disc and attach the rear disc brake caliper assembly before connecting the rear speed sensor. Set the reservoir with brake fluid and bleed the brake line while checking brake fluid levels inside the reservoir and searching for fluid leaks. After fitting the rear wheel adjust its travel distance. Also confirm that the ABS speed sensor signal is working correctly.