How to install the parking brake cable assembly No. 3 on Toyota 4Runner?

The first step for installing parking brake cable assembly No. 3 is to attach it to the parking brake equalizer with a clip followed by fastening four bolts to 13 Nm (127 kgf-cm, 9 ft-lbf) before attaching it to the backing plate using two bolts torqued at 8.0 Nm (82 kgf-cm, 71 in-lbf). Install high-temperature grease before putting on the parking brake shoe and then adding the parking brake shoe strut LH together with the parking brake shoe strut compression spring. Before proceeding to attach the rear disc the technician must install the parking brake shoe return tension spring then inspect the parking brake installation. The rear disc brake caliper assembly LH can now be installed with its 2 bolts torqued to 105 Nm (1071 kgf-cm, 77 ft-lbf). Put the rear wheel in its position while tightening it to 112 Nm (1137 kgf-cm, 82 ft-lbf). Then add the console box assembly rear followed by the No.2 console upper panel garnish and No.1 console upper panel garnish. Install the console panel sub-assembly upper and the console upper rear panel sub-assembly. Examine and correct the parking brake pedal travel if needed as the last step.

How to remove the parking brake cable on Toyota 4Runner?

The first step to remove the parking brake cable starts with breaking the wheel connection to the rear of the vehicle. The process starts by disassembling the LH rear disc brake caliper assembly through removal of two bolts but preserving the flexible hose link to the caliper unit. Lift the rear disc while taking out the parking brake shoe return tension spring in addition to the parking brake shoe strut compression spring. Proceed by removing the parking brake shoe strut LH together with the parking brake shoe. The service technician should first dismantle the console upper rear panel sub-assembly followed by the console panel sub-assembly upper then the No. 1 console upper panel garnish and No. 2 console upper panel garnish. The wording of the following step involves removing the console box assembly rear. Disconnection of the parking brake cable assembly No. 3 requires unfastening both back plate bolts followed by removing the assembly bolts and the clip to separate the device from the parking brake equalizer.

OEM Toyota 4Runner Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Parking Brake Cables found

View related parts
Toyota 4Runner Front Cable
Part Number: 46410-35A00
$80.33 MSRP: $112.76
You Save: $32.43 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010 Toyota 4Runner | Limited, SR5, Trail | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Rear Cable
Part Number: 46430-35571
$87.80 MSRP: $123.23
You Save: $35.43 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Replaces: 46430-35570
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46430-35550
$102.37 MSRP: $143.70
You Save: $41.33 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Cable Assembly, Parking Brake
Part Number: 46420-35781
$79.15 MSRP: $111.09
You Save: $31.94 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable
- Replaces: 46420-35780
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46420-35760
$98.11 MSRP: $137.71
You Save: $39.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Rear Cable
Part Number: 46420-35520
$89.69 MSRP: $125.90
You Save: $36.21 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1995 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-35801
$85.19 MSRP: $119.58
You Save: $34.39 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Manufacturer Note: W(265/70R16 TIRE)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Front Cable
Part Number: 46410-35560
$83.77 MSRP: $117.59
You Save: $33.82 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1995 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-35800
$87.80 MSRP: $123.23
You Save: $35.43 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Manufacturer Note: W(265/70R16 TIRE)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-1998 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-35771
$85.19 MSRP: $119.58
You Save: $34.39 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-35770
$84.36 MSRP: $118.41
You Save: $34.05 (29%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-1998 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-3D080
$93.96 MSRP: $131.89
You Save: $37.93 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Cable Assembly, Parking Brake
Part Number: 46410-35A01
$72.87 MSRP: $102.28
You Save: $29.41 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46430-35400
$102.73 MSRP: $144.20
You Save: $41.47 (29%)
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-35791
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Manufacturer Note: W(265/70R16 TIRE)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-35790
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Manufacturer Note: W(265/70R16 TIRE)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1997-1998 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-35780
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-1998 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Cable
Part Number: 46410-35781
Product Specifications
- Other Name: Cable Assembly, Parking; Brake Cable; Cable Assembly, Parking Brake
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS

Toyota 4Runner Parking Brake Cable

Choose genuine Parking Brake Cable that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Parking Brake Cable for your Toyota 4Runner? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

The Parking Brake Cable in Toyota 4Runner vehicles is highly essential that is related to the parking brake system which is responsible for stopping the car from moving when parked especially Where there is an inclination. This cable links the parking brake that is also referred to as the emergency brake or handbrake to the brake assembly to guarantee proper engagement of the parking brake. Different periods may have seen the use of different styles of Parking Brake Cable depending on the requirements of the vehicles in the 4Runner models. Symptoms of a faulty Parking Brake Cable include limited braking force and in some extreme conditions the parking brake will not function at all. One of the components of the 4Runner that must receive regular maintenance is the Parking Brake Cable.

Toyota 4Runner Parking Brake Cable Parts and Q&A

Cable
46420-35760
Q: How to install the parking brake cable assembly No. 3 on Toyota 4Runner?
A:
The first step for installing parking brake cable assembly No. 3 is to attach it to the parking brake equalizer with a clip followed by fastening four bolts to 13 Nm (127 kgf-cm, 9 ft-lbf) before attaching it to the backing plate using two bolts torqued at 8.0 Nm (82 kgf-cm, 71 in-lbf). Install high-temperature grease before putting on the Parking Brake Shoe and then adding the parking brake shoe strut LH together with the parking brake shoe strut compression spring. Before proceeding to attach the rear disc the technician must install the parking brake shoe return tension spring then inspect the parking brake installation. The rear disc Brake Caliper assembly LH can now be installed with its 2 bolts torqued to 105 Nm (1071 kgf-cm, 77 ft-lbf). Put the rear wheel in its position while tightening it to 112 Nm (1137 kgf-cm, 82 ft-lbf). Then add the console box assembly rear followed by the No.2 console upper panel garnish and No.1 console upper panel garnish. Install the console panel sub-assembly upper and the console upper rear panel sub-assembly. Examine and correct the parking brake pedal travel if needed as the last step.
Cable
46430-35550
Q: How to remove the parking brake cable on Toyota 4Runner?
A:
The first step to remove the parking brake cable starts with breaking the wheel connection to the rear of the vehicle. The process starts by disassembling the LH rear disc Brake Caliper assembly through removal of two bolts but preserving the flexible hose link to the caliper unit. Lift the rear disc while taking out the Parking Brake Shoe return tension spring in addition to the parking brake shoe strut compression spring. Proceed by removing the parking brake shoe strut LH together with the parking brake shoe. The service technician should first dismantle the console upper rear panel sub-assembly followed by the console panel sub-assembly upper then the No. 1 console upper panel garnish and No. 2 console upper panel garnish. The wording of the following step involves removing the console box assembly rear. Disconnection of the parking brake cable assembly No. 3 requires unfastening both back plate bolts followed by removing the assembly bolts and the clip to separate the device from the parking brake equalizer.