How to service and repair a brake caliper on Toyota 4Runner?

Disassembly of the brake caliper starts with using a screwdriver to remove 4 cylinder boot set rings and boots followed by preparing a wooden plate to hold pistons between the caliper with a pad on one side while using compressed air to pull out the pistons from the cylinder but ensure fingers stay away from the pistons' path. Remove both of the 4 piston seals from inside the cylinder. The disc inspection process requires micrometer measurement to assess its thickness since 22.0 mm (0.866 inch) serves as the standard size and 20.0 mm (0.787 inch) represents the minimum requirement; replacing the disc should be done when minimum specifications or uneven wear patterns are present. Use a dial indicator to check disc runout at 10 mm (0.39 inch) from the outside edge with a maximum tolerance of 0.07 mm (0.0028 inch). Disc replacement is necessary if the runout exceeds these specifications; alternatively, disc grinding on a "On-Car" brake lathe would work under specific conditions that require a front hub bearing play within acceptable ranges before runout measurements. To fix disc runout issues remove the hub nuts along with the disc and reinstall it one-sixth of a rotation different from its initial placement while torquing the hub nuts to 103 Nm (1,050 kgf-cm, 76 ft. lbs.) then retest runout until all four hub positions are used; keep the installed piece when the minimum runout reading is better than maximum. Reassemble by doing the opposite steps from disassembly procedure while lubricating specific parts with lithium soap base glycol grease.

OEM Toyota 4Runner Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Brake Calipers found

View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-0C022
$239.16 MSRP: $341.47
You Save: $102.31 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Left; Cylinder Assembly, Disc Brake, Driver Side; Brake Caliper
- Position: Driver Side
- Replaces: 47750-0C021, 47750-0C020, 47750-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-0C022
$239.16 MSRP: $341.47
You Save: $102.31 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Right; Cylinder Assembly, Front Disc Brake, Passenger Side; Brake Caliper
- Position: Passenger Side
- Replaces: 47730-0C021, 47730-0C020, 47730-34040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-35411
$220.41 MSRP: $314.69
You Save: $94.28 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Right; Cylinder Assembly, Front Disc Brake, Passenger Side; Brake Caliper
- Manufacturer Note: FRONT WHEEL BRAKE-16 IN
- Position: Passenger Side
- Replaces: 47730-35160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-35170
$192.21 MSRP: $274.44
You Save: $82.23 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Rear Right; Cylinder Assembly, Rear Disc Brake, Passenger Side; Brake Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-35411
$220.41 MSRP: $314.69
You Save: $94.28 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Left; Cylinder Assembly, Disc Brake, Driver Side; Brake Caliper
- Manufacturer Note: FRONT WHEEL BRAKE-16 IN
- Position: Driver Side
- Replaces: 47750-35160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-60261
$255.94 MSRP: $365.43
You Save: $109.49 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Right; Cylinder Assembly, Front Disc Brake, Passenger Side; Brake Caliper
- Manufacturer Note: FRONT WHEEL BRAKE-17 INCHES
- Position: Passenger Side
- Replaces: 47730-60130
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-35110
$278.19 MSRP: $397.19
You Save: $119.00 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Right; Cylinder Assembly, Front Disc Brake, Passenger Side; Brake Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-35110
$278.19 MSRP: $397.19
You Save: $119.00 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Disc Brake Caliper, Front Left; Cylinder Assembly, Disc Brake, Driver Side; Brake Caliper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-35090
$338.58 MSRP: $483.42
You Save: $144.84 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Front Disc Brake, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-35050
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Front Disc Brake, Passenger Side
- Manufacturer Note: (J)
- Position: Passenger Side
- Replaces: 47730-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1995 Toyota 4Runner | SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-35050
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Disc Brake, Driver Side
- Manufacturer Note: (J)
- Position: Driver Side
- Replaces: 47750-04021, 47750-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1995 Toyota 4Runner | SR5 | 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-26040
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Front Disc Brake, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1994 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-26040
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Disc Brake, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1994 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-35030
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Front Disc Brake, Passenger Side
- Position: Passenger Side
- Replaces: 47730-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1994 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-35030
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Disc Brake, Driver Side
- Position: Driver Side
- Replaces: 47750-04011, 47750-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1994 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-35010
$351.19 MSRP: $514.68
You Save: $163.49 (32%)
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Disc Brake, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-35010
$351.69 MSRP: $515.40
You Save: $163.71 (32%)
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Front Disc Brake, Passenger Side
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-35090
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Disc Brake, Driver Side
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Caliper, Passenger Side
Part Number: 47730-60021
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Front Disc Brake, Passenger Side
- Position: Passenger Side
- Replaces: 47730-60020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1990 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Caliper, Driver Side
Part Number: 47750-60021
Product Specifications
- Other Name: Cylinder Assembly, Disc; Brake Caliper; Cylinder Assembly, Disc Brake, Driver Side
- Position: Driver Side
- Replaces: 47750-60020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1990 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

Toyota 4Runner Brake Caliper

Choose genuine Brake Caliper that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Caliper for your Toyota 4Runner? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Brake Caliper of Toyota 4Runner is mounted prominently into an auto as it is the organ that squeezes the brake pads onto the braking rotors to create friction and halt the car. There are two main types of brake calipers used in 4Runner: The two types of rates are fixed and floating. It is fixed and has the mechanism using the opposed pistons to clamp from two sides; they are rigid than the floating ones and can be more effective but their abilities shall have lesser tolleration of the disc's irregularities. On the other hand, floating calipers move along the parallel line to the center of the rotation of the disc and they tend to stick, this results in bad fuel economy and wear of pads asymmetrically. There might also be models of 4Runner that have swinging calipers that come inwards when the car is braking.

Toyota 4Runner Brake Caliper Parts and Q&A

Caliper, Driver Side
47750-35120
Q: How to service and repair a brake caliper on Toyota 4Runner?
A:
Disassembly of the brake caliper starts with using a screwdriver to remove 4 cylinder boot set rings and boots followed by preparing a wooden plate to hold pistons between the caliper with a pad on one side while using compressed air to pull out the pistons from the cylinder but ensure fingers stay away from the pistons' path. Remove both of the 4 piston seals from inside the cylinder. The disc inspection process requires micrometer measurement to assess its thickness since 22.0 mm (0.866 inch) serves as the standard size and 20.0 mm (0.787 inch) represents the minimum requirement; replacing the disc should be done when minimum specifications or uneven wear patterns are present. Use a dial indicator to check disc runout at 10 mm (0.39 inch) from the outside edge with a maximum tolerance of 0.07 mm (0.0028 inch). Disc replacement is necessary if the runout exceeds these specifications; alternatively, disc grinding on a "On-Car" brake lathe would work under specific conditions that require a front hub bearing play within acceptable ranges before runout measurements. To fix disc runout issues remove the hub nuts along with the disc and reinstall it one-sixth of a rotation different from its initial placement while torquing the hub nuts to 103 Nm (1,050 kgf-cm, 76 ft. lbs.) then retest runout until all four hub positions are used; keep the installed piece when the minimum runout reading is better than maximum. Reassemble by doing the opposite steps from disassembly procedure while lubricating specific parts with lithium soap base glycol grease.