How to replace the Brake Pad Set on Toyota 4Runner?

The brake pads replacement process starts by checking the pad lining thickness using a front wheel removal method to validate 1.0 mm (0.039 inch) minimum specifications; new pads are necessary if this threshold is not reached. Begin the pad replacement by removing the clip along with 2 pins then the anti-rattle spring, 2 pads, and 4 anti-squeal shims. The anti-rattle spring should remain in use when it displays no deterioration, cracking, wear, and remains clean from rust and foreign matter. Disc thickness and runout measurements need to be checked before pad installation because anti-squeal shims must be placed with the new pads. Press brake fluid out from the reservoir by using a monkey wrench handle and equivalent equipment to push in the pistons while ensuring taped protection on the handle due to changing one pad at a time to stop the opposite piston from flying out and adding bleeder plug relief when needed for resistant pistons. First apply disc brake grease to both sides of the inner anti-squeal shims before placing them onto new pads while keeping grease off the pad rubbing faces. Install the pair of pads next. Reinstall the front wheel after installing the anti-rattle spring and 2 pins followed by the clip. Perform the front wheel's torque to 103 Nm or 1,050 kgf-cm and 76 ft. lbs. After installing the wheel complete the procedure by pressing the brake pedal multiple times while confirming the fluid reaches the maximum line.

OEM Toyota 4Runner Brake Pad Set

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Pad Sets found

View related parts
Toyota 4Runner Brake Pads, Rear
Part Number: 04466-60140
$52.57 MSRP: $72.80
You Save: $20.23 (28%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Disc Brake Pad Kit; Rear Pads; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK AK PA561
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Brake Pads, Rear
Part Number: 04466-60090
$52.33 MSRP: $72.48
You Save: $20.15 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Rear; Brake Pad Set, Disc Brake; Disc Brake Pad Kit; Rear Pads; Shoes; Pad Kit, Disc Brake, Rear; Disc Brake Pad Set
- Manufacturer Note: MARK SUMITOMO PS549
- Position: Rear
- Replaces: 04466-60060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Brake Pads, Front
Part Number: 04465-60320
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Pad Kit, Disc Brake, Front; Disc Brake Pad Set
- Manufacturer Note: MARK ADVICS PV565H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2019 Toyota 4Runner | Limited, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro | 4 Cyl 2.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Pad Kit, Disc Brake, Front
Part Number: 04465-35290
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARK SUMITOMO PS558H
- Position: Front
- Replaces: 04465-35250
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, Sport, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
Toyota 4Runner Brake Pads, Front
Part Number: 04465-35240
$75.25 MSRP: $104.50
You Save: $29.25 (28%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Kit; Disc Brake Pad Set; Front Pads; Pad Kit, Disc Brake, Front
- Position: Front
- Replaces: 04465-35190, 04465-35230
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | Base, Limited, SR5 | 4 Cyl 2.7 L GAS, 6 Cyl 3.4 L GAS
View related parts
Toyota 4Runner Pad Kit, Disc Brake, Front
Part Number: 04465-35330
$79.34 MSRP: $111.37
You Save: $32.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake; Disc Brake Pad Set; Brake Pads
- Manufacturer Note: MARK ADVICS VC070H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2023 Toyota 4Runner | 40th Anniversary Edition, Limited, Nightshade, SR5, SR5 Premium, Trail, TRD Off-Road, TRD Off-Road Premium, TRD Pro, TRD Sport, Venture | 6 Cyl 4.0 L GAS
View related parts
Toyota 4Runner Brake Pads
Part Number: 04465-YZZA6
Product Specifications
- Other Name: Brake Pad; Disc Brake Pad Kit; Disc Brake Pad Set; Front Pads; Pads
- Replaces: 04465-YZZ10
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1991 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Toyota 4Runner Brake Pads
Part Number: 04465-YZZA8
Product Specifications
- Other Name: Brake Pad
- Replaces: 04491-35060, 04465-YZZ13, 04465-26210, 04491-35061, 04491-35063, 04465-35010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1988 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Brake Pads
Part Number: 04465-YZZA7
Product Specifications
- Other Name: Brake Pad; Disc Brake Pad Kit; Disc Brake Pad Set; Front Pads; Pads
- Replaces: 04465-YZZ12
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1989-1990 Toyota 4Runner | DLX, SR5 | 4 Cyl 2.4 L GAS
View related parts
Toyota 4Runner Front Pads
Part Number: 04465-YZZA5
Product Specifications
- Other Name: Brake Pad; Disc Brake Pad Kit; Disc Brake Pad Set; Brake Pads; Pads
- Replaces: 04465-YZZ09
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1992-1995 Toyota 4Runner | SR5 | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

Toyota 4Runner Brake Pad Set

Choose genuine Brake Pad Set that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Brake Pad Set for your Toyota 4Runner? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota 4Runner parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota 4Runner Brake Pad Set are the car parts that enable creation of friction to the brake rotors to bring the car to a halt. These are pads made from friction compounds fastened on a metal backing plate; they like all other kinds are consumed through usage due to the natural wearing off of materials. It is worth listing that many 4Runner models have standard wear sensors or indicators that signal when pads' thickness is low and, thus, they should be replaced. Year after year, several styles of Brake Pad Set have been used on Toyota 4Runner: non-metallic, semi-metallic, and ceramic. All three types have their special benefits in relation to amount of friction, wear and tear and level of noise. Correct care, including the change of related equipment such as clips and springs, is important for the functionality and the durability of the brake pads and should be done approximately every 50,000 miles.

Toyota 4Runner Brake Pad Set Parts and Q&A

Brake Pads, Front
04465-35240
Q: How to replace the Brake Pad Set on Toyota 4Runner?
A:
The brake pads replacement process starts by checking the pad lining thickness using a front wheel removal method to validate 1.0 mm (0.039 inch) minimum specifications; new pads are necessary if this threshold is not reached. Begin the pad replacement by removing the clip along with 2 pins then the anti-rattle spring, 2 pads, and 4 anti-squeal shims. The anti-rattle spring should remain in use when it displays no deterioration, cracking, wear, and remains clean from rust and foreign matter. Disc thickness and runout measurements need to be checked before pad installation because anti-squeal shims must be placed with the new pads. Press brake fluid out from the reservoir by using a monkey wrench handle and equivalent equipment to push in the pistons while ensuring taped protection on the handle due to changing one pad at a time to stop the opposite piston from flying out and adding bleeder plug relief when needed for resistant pistons. First apply disc brake grease to both sides of the inner anti-squeal shims before placing them onto new pads while keeping grease off the pad rubbing faces. Install the pair of pads next. Reinstall the front wheel after installing the anti-rattle spring and 2 pins followed by the clip. Perform the front wheel's torque to 103 Nm or 1,050 kgf-cm and 76 ft. lbs. After installing the wheel complete the procedure by pressing the brake pedal multiple times while confirming the fluid reaches the maximum line.