OEM Scion xA Canister Purge Valve

Scion xA Canister Purge Valve Parts Questions & Experts Answers

• Purge Solenoid, Driver Side
  90910-TC001
  Q: How to service and repair the Canister Purge Valve on Scion xA?

  A: You must begin the Canister Purge Valve service procedure by disconnecting the negative battery terminal cable before waiting for 90 seconds to steer clear of Air Bag pretensioning. Service of the Canister Purge Valve begins with the removal of the air cleaner cap through MAF meter connector separation and purge VSV connector along with two wire harness clamps detached from the air cleaner cap and two purge line hoses and the purge line hose released from its hose clamp. Unlock the two clamps which attach the air cleaner cap to the air cleaner case then loosen the hose clamp before removing the air cleaner cap. Remove the screw along with the purge VSV from the engine unit. Start by installing the purge VSV through its screw for installation. The air cleaner cap installation requires reattaching it with secured hose clamp and locking the two case clamps followed by hose connection between purge line and clamp before joining both purge line hoses. Wrap up air cleaner cap connections with wire harness clamps. To complete the procedure attach the purge VSV connector along with the MAF meter connector and reconnect the negative battery cable followed by system initialization steps because certain features need this reset after removing and reinstalling the cable from the battery.