Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Toyota Venza Hood Cable

Hood Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hood Cables found

  • 2010 Toyota Venza Hood Cable - 53611-AA010-B3
    2010 Toyota Venza Hood Cable Diagram - 53611-AA010-B3
    View related parts

    2010 Toyota Venza Cable Handle, Gray, Front

    Part Number: 53611-AA010-B3
    $15.01 MSRP: $20.89
    You Save: $5.88 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Release Handle; Lever Sub-Assembly, Hood Lock Control
    • Position: Front
    • Part Name Code: 53601
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 13.2 x 10.9 x 1.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53611-AA010-B3
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2010 Toyota Venza Submodels:
    • Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
  • 2010 Toyota Venza Hood Cable - 53611-AA010-A0
    2010 Toyota Venza Hood Cable Diagram - 53611-AA010-A0
    View related parts

    2010 Toyota Venza Cable Handle, Front

    Part Number: 53611-AA010-A0
    $13.19 MSRP: $18.36
    You Save: $5.17 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Lever, Hood Lock Control; Hood Release Handle, Front; Release Lever; Release Handle; Lever Sub-Assembly, Hood Lock Control
    • Manufacturer Note: IVORY,TRIM0#
    • Position: Front
    • Part Name Code: 53601
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 13.8 x 11.3 x 1.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53611-AA010-A0
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2010 Toyota Venza Submodels:
    • Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
  • 2010 Toyota Venza Hood Cable - 53630-0T010
    2010 Toyota Venza Hood Cable Diagram - 53630-0T010
    View related parts

    2010 Toyota Venza Release Cable, Front

    Part Number: 53630-0T010
    $35.40 MSRP: $49.28
    You Save: $13.88 (29%)
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly, Hood Lock; Hood Release Cable, Front; Cable Assembly, Hood Lock Control; Hood Release Cable
    • Position: Front
    • Part Name Code: 53630
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 13.7 x 11.0 x 1.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 53630-0T010
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2010 Toyota Venza Submodels:
    • Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2010 Toyota Venza Hood Cable

Looking for affordable OEM 2010 Toyota Venza Hood Cable? Explore our comprehensive catalogue of genuine 2010 Toyota Venza Hood Cable. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Venza Parts Questions & Experts Answers

  • Q: How to install the hood cable assembly on 2010 Toyota Venza?
    A: Beginning the hood cable assembly installation requires you to pass it through engine access and then through the upper radiator support before clamping it as indicated. After that, install the lower No. 1 instrument panel finish panel followed by the cowl side trim sub-assembly LH and the front door scuff plate LH. The hood assembly without the engine hood courtesy switch requires MP grease application on its sliding surfaces before installation using three bolts that need torque of 8.0 Nm (82 kgf-cm, 71 in-lbf) for the centering bolt and 7.5 Nm (77 kgf-cm, 66 in-lbf) for the standard bolt. Place a new hood nut cap as the final installation step. After matching the initial operations use the hood nut cap and connector to complete the process of the assembly that contains the engine hood courtesy switch.Then install the high-pitched horn assembly alongside the radiator grille together with its protective shield until you finish installing the cool air intake duct seal and front fender liner LH through the usage of three new grommets and eight screws, one bolt and four clips. Make sure the pin hold clip receives its slot in a vertical position. Document the torque specifications at 103 Nm (1050 kgf-cm, 76 ft-lbf) to install the front wheel LH and the front fender outside moulding LH. The vehicle operator needs to scrutinize the hood sub-assembly before making adjustments.

Related 2010 Toyota Venza Parts

Alternate Year Models

+
2009 Toyota Venza Hood Cable 2011 Toyota Venza Hood Cable