How to remove the front bumper assembly on 2010 Toyota Venza?

A clip remover is necessary to remove the 12 clips along with the cool air intake duct seal from the front bumper assembly. You should first detach the radiator grille protector and then remove the radiator grille. First apply protective tape to the front bumper assembly before you loosen it from its hooks through the removal of 2 bolts and 6 screws. You must use a clip remover to first remove the clips before taking out the screw. A screwdriver should be used to rotate the pins on RH and LH sides 90 degrees to remove the pin hold clip while the 4 claws must be disengaged before separating the front bumper assembly. Before removing the front bumper assembly in its entirety users should detach the fog light connector if their vehicle has this equipment according to product documentation.

OEM 2010 Toyota Venza Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Bumpers found

View related parts
2010 Toyota Venza Bumper Cover, Rear Driver Side
Part Number: 52159-0T900
$222.33 MSRP: $317.43
You Save: $95.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Rear Bumper L/ C; Bumper Cover, Rear; Cover, Rear Bumper
- Manufacturer Note: PAINT REQ.
- Position: Rear Driver Side
- Part Name Code: 52159
- Item Weight: 3.20 Pounds
- Item Dimensions: 39.5 x 6.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52159-0T900
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2010 Toyota Venza Bumper Cover, Front Driver Side
Part Number: 52119-0T900
$207.85 MSRP: $296.76
You Save: $88.91 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Bumper L/ C; Bumper Cover, Front; Cover, Front Bumper
- Manufacturer Note: PAINT REQ.
- Position: Front Driver Side
- Part Name Code: 52119A
- Item Weight: 25.80 Pounds
- Item Dimensions: 66.3 x 24.5 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52119-0T900
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2010 Toyota Venza Bumper

Looking for affordable OEM 2010 Toyota Venza Bumper? Explore our comprehensive catalogue of genuine 2010 Toyota Venza Bumper. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Toyota Venza Parts Questions & Experts Answers

Q: How to remove the front bumper assembly on 2010 Toyota Venza?
A: A clip remover is necessary to remove the 12 clips along with the cool air intake duct seal from the front bumper assembly. You should first detach the radiator grille protector and then remove the radiator grille. First apply protective tape to the front bumper assembly before you loosen it from its hooks through the removal of 2 bolts and 6 screws. You must use a clip remover to first remove the clips before taking out the screw. A screwdriver should be used to rotate the pins on RH and LH sides 90 degrees to remove the pin hold clip while the 4 claws must be disengaged before separating the front bumper assembly. Before removing the front bumper assembly in its entirety users should detach the fog light connector if their vehicle has this equipment according to product documentation.