How to reassemble the rear bumper on 2011 Toyota Venza?

You should start the rear bumper reassembly by placing No. 1 rear bumper reinforcement and tightening 6 nuts to 68 Nm (693 kgf-cm, 50 ft-lbf). The 2 guides need to be engaged to install the rear bumper energy absorber. Connect the 2 claws of the No. 2 rear bumper side support LH before installing it and adding the screw. The installation of the No. 2 rear bumper side support RH demands a repetition of these identical procedures. Use the 2 claws to mount each of the rear bumper side retainers LH and RH along with their corresponding screws. Begin with screwing the rear bumper spoiler LH (for 1AR-FE) then attach the clip and outside moulding retainer. Insert a new rear bumper pad RH before guiding the installation of a screw for the LH reflex reflector assembly and continue with the same operation for the reflex reflector assembly RH.

OEM 2011 Toyota Venza Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Bumpers found

View related parts
2011 Toyota Venza Bumper Cover, Rear Driver Side
Part Number: 52159-0T900
$238.00 MSRP: $339.81
You Save: $101.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Rear Bumper L/ C; Bumper Cover, Rear; Cover, Rear Bumper
- Manufacturer Note: PAINT REQ.
- Position: Rear Driver Side
- Part Name Code: 52159
- Item Weight: 3.20 Pounds
- Item Dimensions: 39.5 x 6.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52159-0T900
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2011 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2011 Toyota Venza Bumper Cover, Front Driver Side
Part Number: 52119-0T900
$218.31 MSRP: $311.70
You Save: $93.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Bumper L/ C; Bumper Cover, Front; Cover, Front Bumper
- Manufacturer Note: PAINT REQ.
- Position: Front Driver Side
- Part Name Code: 52119A
- Item Weight: 25.80 Pounds
- Item Dimensions: 66.3 x 24.5 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52119-0T900
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2011 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2011 Toyota Venza Bumper

Looking for affordable OEM 2011 Toyota Venza Bumper? Explore our comprehensive catalogue of genuine 2011 Toyota Venza Bumper. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2011 Toyota Venza Bumper Parts Q&A

Q: How to reassemble the rear bumper on 2011 Toyota Venza?
A: You should start the rear bumper reassembly by placing No. 1 rear bumper reinforcement and tightening 6 nuts to 68 Nm (693 kgf-cm, 50 ft-lbf). The 2 guides need to be engaged to install the rear bumper energy absorber. Connect the 2 claws of the No. 2 rear bumper side support LH before installing it and adding the screw. The installation of the No. 2 rear bumper side support RH demands a repetition of these identical procedures. Use the 2 claws to mount each of the rear bumper side retainers LH and RH along with their corresponding screws. Begin with screwing the rear bumper spoiler LH (for 1AR-FE) then attach the clip and outside moulding retainer. Insert a new rear bumper pad RH before guiding the installation of a screw for the LH reflex reflector assembly and continue with the same operation for the reflex reflector assembly RH.