Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 52119-0T900
Bumper Cover, Front Driver Side

2009-2015 Toyota Venza 521190T900

Customer Questions & Expert Answers (6)
Toyota 52119-0T900 Bumper Cover, Front Driver Side
  • Part Description
    Cover, Front Bumper L/ C; Bumper Cover, Front
  • Part Name Code
    52119A
  • Position
    Front Driver Side
  • Manufacturer
    Toyota
Make sure this part fits
$207.85 MSRP: $296.76
You Save: $88.91 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 52119-0T900 Bumper Cover, Front Driver Side is Ref No. 1 in the diagram below

    2014 Toyota Venza Bumper Cover, Front Driver Side Diagram for 52119-0T900
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 52119-0T900

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code52119A
    Manufacturer Part Number52119-0T900
    Part DescriptionCover, Front Bumper L/ C; Bumper Cover, Front
    Other NamesCover, Front Bumper
    Manufacturer NotePAINT REQ.
    Item Dimensions66.3 x 24.5 x 12.5 inches
    Item Weight25.80 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU52119-0T900
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2015 Toyota VenzaBase, LE, Limited, XLE4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will this 52119-0T900 work for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 52119-0T900 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to reassemble the front bumper on Toyota Venza? Posted by Customer
    A:
    The installation process of front bumper side retainer LH begins by inserting the claw mechanism until secure then locking it with a bolt and screw while torquing the bolt to 3.6 Nm (37 kgf-cm, 32 in-lbf). Proceed with the installation of front bumper side retainer RH using the same approach as for LH. The front bumper reinforcement sub-assembly requires 6 bolts that should be torqued to 34 Nm (347 kgf-cm, 25 ft-lbf) before securing the 4 clamps. Add the front bumper energy absorber to its mounts through the two designated guides. Mount the front fender liner retainer on the right-hand side with the same installation approach. Secure the No. 1 lower radiator grille by inserting its 14 claws. Place the front bumper hole cover LH in position by attaching its 4 claws with the pin then repeat the installation on the RH side. The fog light assembly should be installed if required by following the identical procedure for both left and right sides. Position the front license plate bracket into place by using 2 screws for attachment.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the next step after removing the screws and clips for the 2010 Toyota Venza? Posted by Customer
    A:
    Disengage the 5 claws.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Bumper
    Q:
    Is the procedure for the rear bumper plate RH the same as for the LH for the 2011 Toyota Venza? Posted by Customer
    A:
    Yes, use the same procedure for the rear bumper plate RH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Bumper
    Q:
    What is the first step to remove the front bumper assembly for the 2010 Toyota Venza? Posted by Customer
    A:
    Use a clip remover to take out the 12 clips and the cool air intake duct seal.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Bumper
    Q:
    What is the next step after removing the front bumper hole cover for the 2011 Toyota Venza? Posted by Customer
    A:
    Disengage the 14 claws to remove the No. 1 lower radiator grille.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Bumper
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 52119-0T900, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 52119-0T900 Bumper Cover, Front Driver Side. It is sometimes referred to as Toyota Bumper. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 521190T900 Bumper Cover, Front Driver Side. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery