How to remove the rear bumper on Toyota Venza?

The method to remove the rear bumper starts with the removal of the rear bumper plate LH that requires using a screwdriver with taped tip to separate the 2 claws. Proceed with the same removal steps for the rear bumper plate located on the right-hand side. Protective tape should be applied around the rear bumper assembly before the removal of two bolts and two screws. Use a clip remover to extract first the two clips and then remove two more screws and second sets of clips and finally take out the concluding screw. Allstars must both disengage the 5 claws and the 6 claws for effective rear bumper assembly removal according to the provided images.

How to reassemble the front bumper on Toyota Venza?

The installation process of front bumper side retainer LH begins by inserting the claw mechanism until secure then locking it with a bolt and screw while torquing the bolt to 3.6 Nm (37 kgf-cm, 32 in-lbf). Proceed with the installation of front bumper side retainer RH using the same approach as for LH. The front bumper reinforcement sub-assembly requires 6 bolts that should be torqued to 34 Nm (347 kgf-cm, 25 ft-lbf) before securing the 4 clamps. Add the front bumper energy absorber to its mounts through the two designated guides. Mount the front fender liner retainer on the right-hand side with the same installation approach. Secure the No. 1 lower radiator grille by inserting its 14 claws. Place the front bumper hole cover LH in position by attaching its 4 claws with the pin then repeat the installation on the RH side. The fog light assembly should be installed if required by following the identical procedure for both left and right sides. Position the front license plate bracket into place by using 2 screws for attachment.

OEM Toyota Venza Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Bumpers found

View related parts
Toyota Venza Upper Cover, Rear Driver Side
Part Number: 52159-48966
$187.44 MSRP: $267.62
You Save: $80.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Rear Bumper L/C; Bumper Cover, Rear Upper; Cover, Rear Bumper
- Manufacturer Note: PAINT REQ.
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Upper Cover, Rear Driver Side
Part Number: 52159-48962
$187.44 MSRP: $267.62
You Save: $80.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Rear Bumper L/C; Bumper Cover, Rear Upper; Cover, Rear Bumper
- Manufacturer Note: PAINT REQ.
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Bumper Cover, Rear Driver Side
Part Number: 52159-0T902
$232.52 MSRP: $331.98
You Save: $99.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Rear Bumper L/C; Bumper Cover, Rear; Cover, Rear Bumper
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Bumper Cover, Rear Driver Side
Part Number: 52159-0T900
$238.00 MSRP: $339.81
You Save: $101.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Rear Bumper L/ C; Bumper Cover, Rear; Cover, Rear Bumper
- Manufacturer Note: PAINT REQ.
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Bumper Cover, Front Driver Side
Part Number: 52119-4D977
$224.25 MSRP: $320.18
You Save: $95.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Bumper L/C; Bumper Cover, Front; Cover, Front Bumper
- Manufacturer Note: PAINT REQ.
- Position: Front Driver Side
- Replaces: 52119-4D973, 52119-4D969
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Bumper Cover, Front Driver Side
Part Number: 52119-4D975
$217.26 MSRP: $310.19
You Save: $92.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Bumper L/C; Bumper Cover, Front; Cover, Front Bumper
- Manufacturer Note: PAINT REQ.
- Position: Front Driver Side
- Replaces: 52119-4D967
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2023 Toyota Venza | LE | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Toyota Venza Bumper Cover, Front Driver Side
Part Number: 52119-0T902
$214.12 MSRP: $305.71
You Save: $91.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Bumper L/C; Bumper Cover, Front; Cover, Front Bumper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2015 Toyota Venza | LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Toyota Venza Bumper Cover, Front Driver Side
Part Number: 52119-0T900
$218.31 MSRP: $311.70
You Save: $93.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover, Front Bumper L/ C; Bumper Cover, Front; Cover, Front Bumper
- Manufacturer Note: PAINT REQ.
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2015 Toyota Venza | Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Toyota Venza Bumper

Choose genuine Bumper that pass strict quality control tests. You can trust the top quality and lasting durability. Shopping for OEM Bumper for your Toyota Venza? Our website is your one-stop destination. We stock an extensive selection of genuine Toyota Venza parts. The price is affordable so you can save more. It only takes minutes to browse and find the exact fit. Easily add to cart and check out fast. Our hassle-free return policy will keep you stress-free. We process orders quickly for swift delivery. Your parts will arrive faster, so you can get back on the road sooner.

Toyota Venza Bumper Parts and Q&A

Bumper Cover, Rear Driver Side
52159-0T900
Q: How to remove the rear bumper on Toyota Venza?
A:
The method to remove the rear bumper starts with the removal of the rear bumper plate LH that requires using a screwdriver with taped tip to separate the 2 claws. Proceed with the same removal steps for the rear bumper plate located on the right-hand side. Protective tape should be applied around the rear bumper assembly before the removal of two bolts and two screws. Use a clip remover to extract first the two clips and then remove two more screws and second sets of clips and finally take out the concluding screw. Allstars must both disengage the 5 claws and the 6 claws for effective rear bumper assembly removal according to the provided images.
Bumper Cover, Front Driver Side
52119-0T900
Q: How to reassemble the front bumper on Toyota Venza?
A:
The installation process of front bumper side retainer LH begins by inserting the claw mechanism until secure then locking it with a bolt and screw while torquing the bolt to 3.6 Nm (37 kgf-cm, 32 in-lbf). Proceed with the installation of front bumper side retainer RH using the same approach as for LH. The front bumper reinforcement sub-assembly requires 6 bolts that should be torqued to 34 Nm (347 kgf-cm, 25 ft-lbf) before securing the 4 clamps. Add the front bumper energy absorber to its mounts through the two designated guides. Mount the front fender liner retainer on the right-hand side with the same installation approach. Secure the No. 1 lower radiator Grille by inserting its 14 claws. Place the front bumper hole cover LH in position by attaching its 4 claws with the pin then repeat the installation on the RH side. The fog light assembly should be installed if required by following the identical procedure for both left and right sides. Position the front license plate bracket into place by using 2 screws for attachment.

Related Toyota Venza Parts

Browse Toyota Venza Bumper by Years

2023 2022 2021 2015 2014 2013 2012 2011 2010 2009