OEM 2010 Scion xB A/C Condenser

2010 Scion xB Parts Questions & Experts Answers

• Q: How to remove and replace the A/C Condenser on 2010 Scion xB?

  A: The first step for HVAC condenser removal and replacement demands the discharging of refrigerant from the refrigeration system. Begin by taking out the No. 1 radiator grille garnish and then proceed to remove the radiator grille before extracting the front bumper cover. Unscrew this device by loosening its hardware before taking out the battery carrier piece. Eliminate the No. 1 water hose clamp bracket through the removal of its 2 fastening bolts. Unplug the hood lock control cable assembly then take out the hood lock support sub-assembly. The 2 bolts on the No. 2 fan shroud and radiator support cushion must be removed to uninstall both components. Use a bolt remover to disconnect the discharge hose sub-assembly from the cooler condenser after removing both pieces while also removing the O-ring to apply vinyl tape for sealing the openings and stopping water and outside materials from entry. Disassembling the air conditioning tube and accessory assembly requires removing its bolt and unconnecting the condenser tube while also extracting both rubber O-rings to seal the exposed areas properly. The removal process requires the condenser to be taken out of the vehicle structure with caution for both condenser and radiator safety.