How to install the rear Sway Bar Kit on 2010 Scion tC?

The first step to install the rear sway bar kit requires attachment of sway bar bushes to the sway bar kit while positioning them on the stopper ring outer side with the protrusion directed towards the vehicle center. Start by attaching the sway bar kit with its two No. 3 sway bar brackets using 2 bolts followed by 2 nuts until they reach a torque setting of 35 Nm (357 kgf-cm, 26 ft-lbf). The rear sway bar link assembly on the left-hand side requires you to install the sway bar link LH with 2 nuts at 44 Nm (49 kgf-cm, 32 ft-lbf); maintain a 5 mm hexagon wrench on the stud for stability when the ball joint turns with the nut. The same procedure must be repeated to assemble the right-hand rear sway bar link. Conclude the process by inspecting and making any necessary corrections to the rear wheel alignment.

OEM 2010 Scion tC Sway Bar Kit

Stabilizer Sway Bar Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Kits found

View related parts
2010 Scion tC Stabilizer Bar, Rear
Part Number: 48812-21030
$107.94 MSRP: $151.52
You Save: $43.58 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.10 Pounds
- Item Dimensions: 41.6 x 9.1 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-21030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2010 Scion tC Stabilizer Bar, Front
Part Number: 48811-21050
$107.94 MSRP: $151.52
You Save: $43.58 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar; Bar, Stabilizer, Front
- Position: Front
- Part Name Code: 48811
- Item Weight: 7.90 Pounds
- Item Dimensions: 43.4 x 12.4 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48811-21050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2010 Scion tC Stabilizer Bar, Rear
Part Number: 48812-21060
$96.58 MSRP: $135.56
You Save: $38.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Stabilizer, Rear; Suspension Stabilizer Bar, Rear; Sway Bar
- Position: Rear
- Part Name Code: 48812
- Item Weight: 5.10 Pounds
- Item Dimensions: 41.1 x 9.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 48812-21060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2010 Scion tC Sway Bar Kit

Looking for affordable OEM 2010 Scion tC Sway Bar Kit? Explore our comprehensive catalogue of genuine 2010 Scion tC Sway Bar Kit. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Parts Questions & Experts Answers

Q: How to install the rear Sway Bar Kit on 2010 Scion tC?
A: The first step to install the rear sway bar kit requires attachment of sway bar bushes to the sway bar kit while positioning them on the stopper ring outer side with the protrusion directed towards the vehicle center. Start by attaching the sway bar kit with its two No. 3 sway bar brackets using 2 bolts followed by 2 nuts until they reach a torque setting of 35 Nm (357 kgf-cm, 26 ft-lbf). The rear sway bar link assembly on the left-hand side requires you to install the sway bar link LH with 2 nuts at 44 Nm (49 kgf-cm, 32 ft-lbf); maintain a 5 mm hexagon wrench on the stud for stability when the ball joint turns with the nut. The same procedure must be repeated to assemble the right-hand rear sway bar link. Conclude the process by inspecting and making any necessary corrections to the rear wheel alignment.