Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 48811-21050
Stabilizer Bar, Front

2005-2010 Scion tC 4881121050

Customer Questions & Expert Answers (9)
Toyota 48811-21050 Stabilizer Bar, Front
  • Part Description
    Bar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
  • Part Name Code
    48811
  • Position
    Front
  • Manufacturer
    Toyota
Make sure this part fits
$107.94 MSRP: $151.52
You Save: $43.58 (29%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 48811-21050 Stabilizer Bar, Front is Ref No. 12 in the diagram below

    2008 Scion tC Stabilizer Bar, Front Diagram for 48811-21050
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 48811-21050

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code48811
    Manufacturer Part Number48811-21050
    Part DescriptionBar, Stabilizer; Suspension Stabilizer Bar, Front; Sway Bar
    Other NamesBar, Stabilizer, Front
    Item Dimensions43.4 x 12.4 x 4.9 inches
    Item Weight7.90 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU48811-21050
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Scion tCBase, Spec4 Cyl 2.4 L GAS

  • Customer Questions & Expert Answers

    Q:
    Will 48811-21050 fit my vehicle? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 48811-21050 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the first step to install the rear stabilizer bar for the 2010 Scion tC? Posted by Customer
    A:
    Attach the 2 stabilizer bushes to the stabilizer bar, ensuring the bush is positioned on the outer side of the stopper ring with the protrusion facing towards the inside of the vehicle.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    How do you remove the rear stabilizer link assembly on the left-hand side for the 2008 Scion tC? Posted by Customer
    A:
    First, take off the rear stabilizer link assembly by removing the 2 nuts and the stabilizer link. If the ball joint turns with the nut, use a 5 mm hexagon wrench to hold the stud.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the first step to remove the front stabilizer bar for the 2008 Scion tC? Posted by Customer
    A:
    Ensure the front wheel is facing straight ahead.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the inspection process before installing the nut for the 2007 Scion tC? Posted by Customer
    A:
    Flip the ball joint stud back and forth 5 times, then use a torque wrench to continuously turn the nut for 2 to 4 seconds per turn, taking the torque reading on the fifth turn, ensuring the standard turning torque is 1.0 Nm (10 kgf-cm, 8.7 inch lbs.) or less, while checking for unusual drag or rattle during rotation, and confirming there are no cracks or grease leaks on the dust cover, and that the stabilizer link LH is not deformed.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the procedure for the rear stabilizer link assembly on the left-hand side for the 2009 Scion tC? Posted by Customer
    A:
    Install the stabilizer link LH with 2 nuts, applying a torque of 44 Nm (49 kgf-cm, 32 ft-lbf); if the ball joint rotates with the nut, hold the stud using a 5 mm hexagon wrench.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What is the next step after removing the left-hand side stabilizer link assembly for the 2009 Scion tC? Posted by Customer
    A:
    Repeat the same procedure for the right-hand side stabilizer link assembly.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should be disconnected after removing the stabilizer link assemblies for the 2006 Scion tC? Posted by Customer
    A:
    Disconnect the tie rod end sub-assemblies (LH and RH), pressure feed tube assembly, and both front suspension No. 1 lower arm sub-assemblies (LH and RH).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    Q:
    What should be connected after the pressure feed tube assembly for the 2005 Scion tC? Posted by Customer
    A:
    Connect the tie rod end sub-assemblies LH and RH.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Sway Bar Kit
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 48811-21050, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 48811-21050 Stabilizer Bar, Front. It is sometimes referred to as Toyota Sway Bar Kit. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 4881121050 Stabilizer Bar, Front. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Scion parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery