How to install the headlight dimmer switch assembly on 2010 Scion tC?

Begin the headlight dimmer switch assembly installation by attaching the claw to the assembly before its placement followed by connector coupling. After that you must install the steering column cover followed by connecting the cable to the negative battery terminal. The procedure calls for initialization because disconnecting and reconnecting the cable at the negative (-) battery terminal may trigger system requirements.

OEM 2010 Scion tC Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2010 Scion tC Headlamp Switch
Part Number: 84140-20670
$151.33 MSRP: $214.22
You Save: $62.89 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Headlamp Dimmer; Multi Purpose Switch
- Part Name Code: 84140
- Item Weight: 1.60 Pounds
- Item Dimensions: 15.2 x 11.6 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84140-20670
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2010 Scion tC Dimmer Switch

Looking for affordable OEM 2010 Scion tC Dimmer Switch? Explore our comprehensive catalogue of genuine 2010 Scion tC Dimmer Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Parts Questions & Experts Answers

Q: How to install the headlight dimmer switch assembly on 2010 Scion tC?
A: Begin the headlight dimmer switch assembly installation by attaching the claw to the assembly before its placement followed by connector coupling. After that you must install the steering column cover followed by connecting the cable to the negative battery terminal. The procedure calls for initialization because disconnecting and reconnecting the cable at the negative (-) battery terminal may trigger system requirements.