How to remove the ignition switch assembly on 2010 Scion tC?

It is necessary to remove the ignition switch assembly for the 2AZ-FE starting system by disconnecting the battery cable from the negative terminal then waiting for 90 seconds to avoid triggering Air Bag and seat belt pretensioner activation. You need to remove the steering column cover by unfastening 2 screws and separating the lower cover while steering the wheel when needed to access the screws. Remove the cable tie after you disconnect the ignition switch connector and the unlock warning switch connector. The claw fitting requires a small screwdriver to detach before uninstalling the unlock warning switch connector. The procedure ends by removing two screws that attach both the ignition switch and the lock stopper screw.

OEM 2010 Scion tC Ignition Switch

Starter Ignition Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Switches found

View related parts
2010 Scion tC Warning Switch
Part Number: 84052-12070
$25.45 MSRP: $35.43
You Save: $9.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Warning Switch; Switch
- Manufacturer Note: STEERING CORUMN
- Part Name Code: 84052
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84052-12070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS
View related parts
2010 Scion tC Ignition Switch
Part Number: 84450-12200
$103.17 MSRP: $144.81
You Save: $41.64 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Ignition Or Starter; Ignition Starter Switch
- Part Name Code: 84450
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.4 x 5.8 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84450-12200
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS
View related parts
2010 Scion tC Warning Switch
Part Number: 84052-32030
$25.51 MSRP: $35.51
You Save: $10.00 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Un-Lock Warning; Hazard Warning Switch; Ignition Switch; Switch
- Part Name Code: 84052
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84052-32030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2010 Scion tC Ignition Switch

Looking for affordable OEM 2010 Scion tC Ignition Switch? Explore our comprehensive catalogue of genuine 2010 Scion tC Ignition Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Parts Questions & Experts Answers

Q: How to remove the ignition switch assembly on 2010 Scion tC?
A: It is necessary to remove the ignition switch assembly for the 2AZ-FE starting system by disconnecting the battery cable from the negative terminal then waiting for 90 seconds to avoid triggering Air Bag and seat belt pretensioner activation. You need to remove the steering column cover by unfastening 2 screws and separating the lower cover while steering the wheel when needed to access the screws. Remove the cable tie after you disconnect the ignition switch connector and the unlock warning switch connector. The claw fitting requires a small screwdriver to detach before uninstalling the unlock warning switch connector. The procedure ends by removing two screws that attach both the ignition switch and the lock stopper screw.