OEM 2010 Scion tC Clutch Master Cylinder

2010 Scion tC Parts Questions & Experts Answers

• Q: How to install the clutch master cylinder assembly on 2010 Scion tC?

  A: Two nuts must be used to secure the clutch master cylinder assembly by following a torque setting of 12 Nm (120 kgf-cm, 9 ft-lbf). First apply MP grease to the hole pin contact surface and clevis bush contact points then join the clutch pedal to the clevis through the hole pin from the right vehicle side and secure with a clip. The installation of the clutch master cylinder assembly requires Special Service Tool: 09023-00101 to attach it to the flexible hose tube while torquing at 15 Nm (155 kgf-cm, 11 ft-lbf). Install the clutch reservoir tube on the clutch master cylinder using a clip which should have its red marking facing toward the top. The brake booster assembly should be mounted together with the brake master cylinder sub-assembly. After brake fluid fills the reservoir you must bleed both the brake line and clutch pipe line using appropriate torque of 8.4 Nm (85 kgf-cm, 74 in-lbf). Verify the brake pedal height followed by clutch pedal sub-assembly adjustment and examine both systems for noticeable fluid leaks. End your procedure by inspecting the fluid level that exists in the reservoir.