How to install the Clutch Slave Cylinder assembly on 2010 Scion tC?

The first step to install the clutch release cylinder assembly requires 2 bolt attachment followed by torqueing them to 12 Nm (120 kgf-cm, 9 ft-lbf). Attach the flexible hose tube by using the bolt then tighten it to a torque setting of 18 Nm (184 kgf-cm, 13 ft-lbf). Special Service Tool: 09023-00101 should be utilized to attach the flexible hose tube and achieve a 15 Nm (155 kgf-cm, 11 ft-lbf) torque setting. Before proceeding finish the installation process by adding brake fluid to the reservoir then conduct a clutch system air bleed operation while maintaining 8.4 Nm (85 kgf-cm, 74 in-lbf) torque. Check for clutch fluid leakages as the last step.

OEM 2010 Scion tC Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2010 Scion tC Slave Cylinder
Part Number: 31470-42031
$73.02 MSRP: $102.49
You Save: $29.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clutch Release With Bearing; Clutch Slave Cylinder; Cylinder Assembly, Clutch Release
- Replaces: 31470-42030
- Part Name Code: 31470
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.9 x 5.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 31470-42031
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2010 Scion tC Submodels:
- Base, Spec | 4 Cyl 2.4 L GAS

2010 Scion tC Clutch Slave Cylinder

Looking for affordable OEM 2010 Scion tC Clutch Slave Cylinder? Explore our comprehensive catalogue of genuine 2010 Scion tC Clutch Slave Cylinder. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2010 Scion tC Parts Questions & Experts Answers

Q: How to install the Clutch Slave Cylinder assembly on 2010 Scion tC?
A: The first step to install the clutch release cylinder assembly requires 2 bolt attachment followed by torqueing them to 12 Nm (120 kgf-cm, 9 ft-lbf). Attach the flexible hose tube by using the bolt then tighten it to a torque setting of 18 Nm (184 kgf-cm, 13 ft-lbf). Special Service Tool: 09023-00101 should be utilized to attach the flexible hose tube and achieve a 15 Nm (155 kgf-cm, 11 ft-lbf) torque setting. Before proceeding finish the installation process by adding brake fluid to the reservoir then conduct a clutch system air bleed operation while maintaining 8.4 Nm (85 kgf-cm, 74 in-lbf) torque. Check for clutch fluid leakages as the last step.