Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Toyota 31420-20070
Master Cylinder

2000-2010 Toyota 3142020070

Customer Questions & Expert Answers (26)
Toyota 31420-20070 Master Cylinder
Toyota 31420-20070 Master Cylinder
Toyota 31420-20070 Master Cylinder
  • Part Description
    Cylinder Assembly, Master; Clutch Master Cylinder; Brake Master Cylinder
  • Part Name Code
    31410
  • Manufacturer
    Toyota
Make sure this part fits
$141.34 MSRP: $200.08
You Save: $58.74 (30%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Product Specifications

    BrandGenuine Toyota
    Part Name Code31410
    Manufacturer Part Number31420-20070
    Part DescriptionCylinder Assembly, Master; Clutch Master Cylinder; Brake Master Cylinder
    Other NamesCylinder Assembly, Clutch Master
    Item Dimensions15.8 x 11.3 x 3.3 inches
    Item Weight2.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerToyota
    SKU31420-20070
    WarrantyThis genuine Toyota part is guaranteed by Toyota's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Scion tCBase, Spec4 Cyl 2.4 L GAS
    2002-2006 Toyota CamryBase, LE, SE, XLE4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
    2000-2005 Toyota CelicaGT, GTS4 Cyl 1.8 L GAS
    2003-2008 Toyota CorollaCE, LE, S, XRS4 Cyl 1.8 L GAS
    2004-2008 Toyota SolaraSE, SE Sport, SLE, Sport4 Cyl 2.4 L GAS, 6 Cyl 3.3 L GAS

  • Customer Questions & Expert Answers

    Q:
    Can you provide the right 31420-20070 for my car? Posted by ToyotaPartsNow Specialist
    A:
    Find out if part number 31420-20070 is the right fit for your car by Selecting Your Vehicle model.
    Posted by ToyotaPartsNow Specialist
    Q:
    How to remove and replace the Clutch Master Cylinder on Scion tC? Posted by Customer
    A:
    The first step to replace the Clutch Master Cylinder is draining brake fluid before immediately washing off all affected painted surfaces. The first step involves removing both brake master cylinder sub-assembly coupled with the brake booster assembly from the vehicle. Remove the clutch reservoir tube by unscrewing the clip while detaining the fluid through a container. Prior to disconnecting the clutch master cylinder flexible hose tube use Special Service Tool: 09023-00101 while placing fluids into a container. The procedure ends with removing the clip and hole pin from the clutch master cylinder push rod clevis hole before extracting the clutch master cylinder assembly by loosening its two retaining nuts.
    Posted by ToyotaPartsNow Specialist
    Q:
    What is the next step after disconnecting the flexible hose tube for the 2008 Scion tC? Posted by Customer
    A:
    Remove the clip and hole pin from the clutch master cylinder push rod clevis hole.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be applied to the contact surface of the hole pin and clevis bush for the 2007 Scion tC? Posted by Customer
    A:
    Apply MP grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    How do you connect the clevis to the clutch pedal sub-assembly for the 2005 Scion tC? Posted by Customer
    A:
    Connect the clevis to the clutch pedal sub-assembly with the hole pin and install the clip afterward.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the process for removing the clutch master cylinder push rod clevis whole pin for the 2005 Toyota Camry? Posted by Customer
    A:
    Take out the clip and hole pin, then remove the clutch master cylinder assembly by unscrewing the 2 nuts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    How do you remove the snap ring for the 2008 Scion tC? Posted by Customer
    A:
    Using snap ring pliers, remove the snap ring while pushing on the piston rod.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    How do you disconnect the clutch reservoir tube for the 2003 Toyota Camry? Posted by Customer
    A:
    Loosen the clip and use a container to catch any fluid.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the final step after completing the installation for the 2009 Scion tC? Posted by Customer
    A:
    Check the fluid level in the reservoir.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be applied to the contact surface of the hole pin and clevis bush for the 2010 Scion tC? Posted by Customer
    A:
    MP grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the next step after installing the push rod for the 2004 Toyota Celica? Posted by Customer
    A:
    Install the boot to the cylinder, temporarily install the lock nut and clevis.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    How do you remove the clutch master cylinder assembly for the 2003 Toyota Corolla? Posted by Customer
    A:
    Take off the 2 nuts.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be done after securing the master cylinder for the 2001 Toyota Celica? Posted by Customer
    A:
    Install the pin and clip.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be done after removing the Clutch Master Cylinder Kit for the 2008 Toyota Corolla? Posted by Customer
    A:
    Next, take off the inlet union and grommet, then loosen the lock nut and remove the clevis.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the torque specification for securing the master cylinder for the 2005 Toyota Celica? Posted by Customer
    A:
    12 Nm (120 kgf-cm, 9 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    How is the piston with spring installed into the cylinder for the 2006 Toyota Corolla? Posted by Customer
    A:
    Install the piston with spring into the cylinder, and then install the stop plate to the push rod.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What tool is needed to disconnect the clutch line for the 2002 Toyota Celica? Posted by Customer
    A:
    Special Service Tool: 09023-00100.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    How do you remove the clevis for the 2000 Toyota Celica? Posted by Customer
    A:
    Loosen the lock nut to remove the clevis, then take off the boot from the cylinder.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What tool is used to disconnect the clutch master cylinder to flexible hose tube for the 2007 Toyota Corolla? Posted by Customer
    A:
    Special Service Tool: 09023-00101.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What tool is used to disconnect the clutch master cylinder from the flexible hose tube for the 2005 Toyota Corolla? Posted by Customer
    A:
    Use Special Service Tool: 09023-00101.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be done after removing the inlet union and grommet for the 2008 Toyota Solara? Posted by Customer
    A:
    Loosen the lock nut and remove the push rod clevis, then remove the lock nut from the push rod and the boot from the cylinder body.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the torque specification for installing the clutch master cylinder assy for the 2004 Toyota Solara? Posted by Customer
    A:
    Torque to 12 Nm (120 kgf-cm, 9 ft. lbs.).
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What should be done during reassembly for the 2007 Toyota Solara? Posted by Customer
    A:
    Coat the indicated parts with lithium soap base glycol grease, install the piston with the spring into the cylinder, attach the stop plate to the push rod, and then the push rod to the cylinder body.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    How do you remove the piston from the cylinder body for the 2005 Toyota Solara? Posted by Customer
    A:
    Use snap ring pliers to remove the snap ring while pushing on the piston rod, then take out the push rod.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    How do you connect the clevis to the clutch pedal assembly for the 2006 Toyota Solara? Posted by Customer
    A:
    Connect the clevis with the hole pin from the left side of the vehicle and secure it with a clip.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    Q:
    What is the first step to reassemble the clutch master cylinder for the 2008 Toyota Solara? Posted by Customer
    A:
    Coat the indicated parts with lithium soap base glycol grease.
    Posted by ToyotaPartsNow Specialist
    See expert answers on similar Clutch Master Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Toyota 31420-20070, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Toyota part # 31420-20070 Master Cylinder. It is sometimes referred to as Toyota Clutch Master Cylinder. OEM parts are unrivaled in terms of quality. They go through extensive quality control inspections and are produced in accordance with Toyota's official factory specifications. All of these remove defects and imperfections. So you can relax knowing they promise exceptional lifespan and flawless fitment.

ToyotaPartsNow.com is a leading supplier of genuine Toyota parts such as Toyota 3142020070 Master Cylinder. At ToyotaPartsNow.com, we have a wide variety of OEM Toyota parts available at competitive prices. Our comprehensive range of genuine Toyota parts come with a manufacturer's warranty for peace of mind. We also prioritize customer satisfaction, providing a hassle-free return policy and expedited delivery for all our parts. For detailed Toyota parts information, click here.
Choose ToyotaPartsNow for discounted prices, exceptional service and fast delivery