OEM 2009 Toyota Yaris Water Pump

2009 Toyota Yaris Water Pump Parts Q&A

• Q: How to install the water pump assembly and related components on 2009 Toyota Yaris?

  A: Start by placing the water pump assembly with its new gasket through three bolts and two nuts while torquing at 11 Nm (112 kgf-cm and 8.1 ft-lbf). Install only provisionally the water pump pulley using Special Service Tools: 09960-10010 09962-01000 to tighten its 3 bolts to a torque of 15 Nm (153 kgf-cm, 11 ft-lbf). The engine installation continues with the generator assembly after installing the engine mounting insulator sub-assembly RH for hatchback and sedan variants. Succeeding the fan and generator installation you must position the V-belt and examine its tension before completing the installation. Install the cable to the negative battery terminal before tightening it to 5.4 Nm (55 kgf-cm, 48 in-lbf). Then add engine coolant while also checking for leaks. Both sedan and hatchback models require the final installation of the engine under cover RH.