How to install the Camshaft Position Sensor on 2009 Toyota Yaris?

Engine oil application on the O-ring of the sensor serves as a first step before installing the Camshaft Position Sensor for the 1NZ-FE engine control system. Utilize the bolt to mount the sensor before tightening the bolt to 8.0 Nm (82 kgf-cm, 71 in-lbf) configuration while keeping the O-ring from any twisting motion. After applying oil to the sensor O-ring you should connect the camshaft position sensor connector. You should use 5.4 Nm torque (55 kgf-cm, 48 in-lbf) to fasten the cable to the negative battery terminal. Check for any leakage from the engine oil as the last step.

OEM 2009 Toyota Yaris Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2009 Toyota Yaris Camshaft Position Sensor
Part Number: 90919-05024
$116.24 MSRP: $163.16
You Save: $46.92 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Cam Position; Engine Camshaft Position Sensor; Cam Position Sensor; Camshaft Sensor; Cam Sensor
- Replaces: 19300-BZ020
- Part Name Code: 11101E
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.4 x 11.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90919-05024
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Yaris Submodels:
- Base, L, LE, S, SE | 4 Cyl 1.5 L GAS

2009 Toyota Yaris Camshaft Position Sensor

Looking for affordable OEM 2009 Toyota Yaris Camshaft Position Sensor? Explore our comprehensive catalogue of genuine 2009 Toyota Yaris Camshaft Position Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Yaris Camshaft Position Sensor Parts Q&A

Q: How to install the Camshaft Position Sensor on 2009 Toyota Yaris?
A: Engine oil application on the O-ring of the sensor serves as a first step before installing the Camshaft Position Sensor for the 1NZ-FE engine control system. Utilize the bolt to mount the sensor before tightening the bolt to 8.0 Nm (82 kgf-cm, 71 in-lbf) configuration while keeping the O-ring from any twisting motion. After applying oil to the sensor O-ring you should connect the camshaft position sensor connector. You should use 5.4 Nm torque (55 kgf-cm, 48 in-lbf) to fasten the cable to the negative battery terminal. Check for any leakage from the engine oil as the last step.

Related 2009 Toyota Yaris Parts

Alternate Year Models

2008 Toyota Yaris Camshaft Position Sensor 2010 Toyota Yaris Camshaft Position Sensor