How to install the front Brake Line on 2009 Toyota Venza?

A correct installation of the front brake flexible hose requires verification of the part number for each hose before installation to check their interchangeability status. Previous hoses should be connected after double-checking the marks for identification which existed when disconnection occurred. Begin this procedure by connecting the front flexible hose to the disc brake cylinder assembly using a new union bolt along with a gasket and torquing it to 29 Nm (300 kgf-cm, 22 ft-lbf) conduct while ensuring a secure fit for the hose lock in its designated hole. Install the front flexible hose while using a new clip by pushing it to its complete extension. The assembly of the front flexible hose and brake line requires a union nut wrench to connect them while another wrench stabilizes the hose through torque of 15 Nm (155 kgf-cm, 11 ft-lbf). This installation must prevent brake line damage and ensure proper orientation of all parts to avoid containing foreign elements. Union nut wrench users should refer to torque values that require special calculation performed with their torque wrench. The front flexible hose with speed sensor bracket assembly should mount to the absorber bracket through a bolt torque specification of 19 Nm (192 kgf-cm, 14 ft-lbf). Ensure that the speed sensor harness bracket is installed before proceeding with assembly. Following installation complete the brake fluid reservoir before performing brake line bleeding while inspecting for leakage then evaluating the reservoir fluid level until you can install the front wheel with a torque of 103 Nm (1050 kgf-cm, 76 ft-lbf).

OEM 2009 Toyota Venza Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
2009 Toyota Venza Flex Hose, Rear Driver Side
Part Number: 90947-A2036
$93.13 MSRP: $130.73
You Save: $37.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Position: Rear Driver Side
- Part Name Code: 47319F
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 6.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2036
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Flex Hose, Passenger Side
Part Number: 90947-A2035
$86.99 MSRP: $122.11
You Save: $35.12 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Position: Passenger Side
- Part Name Code: 47318F
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 6.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2035
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Flex Hose, Rear Driver Side
Part Number: 90947-A2038
$76.54 MSRP: $107.44
You Save: $30.90 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hose, Flexible(For Rear Driver Side); Hydraulic Hose
- Position: Rear Driver Side
- Part Name Code: 47319F
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.4 x 6.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2038
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Flex Hose, Passenger Side
Part Number: 90947-A2037
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hydraulic Hose
- Position: Passenger Side
- Part Name Code: 47318F
- Item Weight: 0.90 Pounds
- Item Dimensions: 7.3 x 6.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2037
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Flex Hose, Front
Part Number: 90947-A2034
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front
- Part Name Code: 47313J
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2034
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2009 Toyota Venza Flex Hose, Front
Part Number: 90947-A2033
$81.87 MSRP: $114.92
You Save: $33.05 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Flexible; Brake Hydraulic Hose, Front Left, Front Right; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
- Position: Front
- Part Name Code: 47313A
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.1 x 6.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90947-A2033
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Venza Submodels:
- Base, LE, Limited, XLE | 4 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2009 Toyota Venza Brake Line

Looking for affordable OEM 2009 Toyota Venza Brake Line? Explore our comprehensive catalogue of genuine 2009 Toyota Venza Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Venza Brake Line Parts Q&A

Q: How to install the front Brake Line on 2009 Toyota Venza?
A: A correct installation of the front brake flexible hose requires verification of the part number for each hose before installation to check their interchangeability status. Previous hoses should be connected after double-checking the marks for identification which existed when disconnection occurred. Begin this procedure by connecting the front flexible hose to the disc brake cylinder assembly using a new union bolt along with a gasket and torquing it to 29 Nm (300 kgf-cm, 22 ft-lbf) conduct while ensuring a secure fit for the hose lock in its designated hole. Install the front flexible hose while using a new clip by pushing it to its complete extension. The assembly of the front flexible hose and brake line requires a union nut wrench to connect them while another wrench stabilizes the hose through torque of 15 Nm (155 kgf-cm, 11 ft-lbf). This installation must prevent brake line damage and ensure proper orientation of all parts to avoid containing foreign elements. Union nut wrench users should refer to torque values that require special calculation performed with their torque wrench. The front flexible hose with speed sensor bracket assembly should mount to the absorber bracket through a bolt torque specification of 19 Nm (192 kgf-cm, 14 ft-lbf). Ensure that the speed sensor harness bracket is installed before proceeding with assembly. Following installation complete the brake fluid reservoir before performing brake line bleeding while inspecting for leakage then evaluating the reservoir fluid level until you can install the front wheel with a torque of 103 Nm (1050 kgf-cm, 76 ft-lbf).