My Garage
Cart

OEM 2009 Toyota Tundra Brake Line

Brake Hose
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Lines found

  • 2009 Toyota Tundra Brake Line - 90947-A2016
    2009 Toyota Tundra Brake Line Diagram - 90947-A2016
    View related parts

    2009 Toyota Tundra Flex Hose, Front

    Part Number: 90947-A2016
    $45.74 MSRP: $63.67
    You Save: $17.93 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Hose, Flexible; Brake Hydraulic Hose, Front; Brake Hose; Brake Line; Hose, Flexible(For Front); Hydraulic Hose
    • Position: Front
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 7.1 x 6.1 x 1.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90947-A2016
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Toyota Tundra Submodels:
    • Base, Limited, Platinum, SR5 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
  • 2009 Toyota Tundra Brake Line - 90947-A2089
    2009 Toyota Tundra Brake Line Diagram - 90947-A2089
    View related parts

    2009 Toyota Tundra Flex Hose, Rear Outer

    Part Number: 90947-A2089
    $41.98 MSRP: $58.44
    You Save: $16.46 (29%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Hose, Flexible; Brake Hydraulic Hose, Rear Outer; Brake Hose; Brake Line; Hose, Flexible(For Rear Passenger Side); Hose, Flexible(For Rear Driver Side); Brake Hydraulic Hose; Hydraulic Hose
    • Position: Rear Outer
    • Replaces: 90947-A2013
    • Item Weight: 0.70 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 90947-A2089
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2009 Toyota Tundra Submodels:
    • 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, Trail, TRD Pro | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2009 Toyota Tundra Brake Line

Looking for affordable OEM 2009 Toyota Tundra Brake Line? Explore our comprehensive catalogue of genuine 2009 Toyota Tundra Brake Line. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Tundra Parts Questions & Experts Answers

  • Q: How to install the front Brake Line on 2009 Toyota Tundra?
    A: Installation of the front brake flexible hose begins with attaching the clips marked as "A" onto the hose. A union nut wrench (10 mm) should first be used to join the flexible hose onto both brake and wheel cylinder tubes while someone also holds the flexible hose with another wrench. To install the front brake flexible hose you should apply 15 Nm torque when not using a union nut wrench but only 14 Nm when using the tool. A torque wrench with 300 mm (11.8 in.) fulcrum length should be used to achieve precision torque application by keeping the union nut wrench in line with the torque wrench movement. When assembling these tubes pay attention to both bend prevention and joint-point contamination prevention of brake tubes as well as wheel cylinder tubes. The next sequence of work includes filling the brake reservoir with fluid before performing air bleeding through the brake master cylinder and brake line and the VSC actuator assembly. You must examine the reservoir brake fluid level and the brake fluid leak points following the procedure. To finish the installation thread in the front wheel you must use a torque wrench set to 131 Nm (1336 kgf-cm, 97 ft-lbf) if the wheel is aluminum but steel wheels need 209 Nm (2131 kgf-cm, 154 ft-lbf).

Related 2009 Toyota Tundra Parts