OEM 2009 Toyota Sequoia Steering Angle Sensor

2009 Toyota Sequoia Steering Angle Sensor Parts Q&A

• Q: How to install the Steering Angle Sensor on 2009 Toyota Sequoia?

  A: Begin the Steering Angle Sensor installation by matching the spiral cable pins to its appropriate installation holes on the steering sensor and attach the six claws before connecting the spiral cable to the sensor. The installation process should begin with placing the spiral cable sub-assembly and then add the upper steering column cover followed by the lower steering column cover. The adjustment of the spiral cable should be followed by steering wheel assembly installation and installation of the steering pad and lower No. 3 and No. 2 steering wheel covers. The cable installation requires a 5.4 Nm torque when connecting it to the negative battery terminal. Ensure you initialize affected systems if the cable reconnect involves these particular systems. Check if the SRS warning light operates correctly after performing the inspection.