Warranty: This genuine part is guaranteed by Toyota's
factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
2009 Toyota Sequoia Wiper Switch
Looking for affordable OEM 2009 Toyota Sequoia Wiper Switch? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Wiper Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!
2009 Toyota Sequoia Wiper Switch Parts Questions & Experts Answers
Q: How to remove the wiper switch on 2009 Toyota Sequoia?
A: Starting the process of wiper switch removal requires users to first remove the front door scuff plate LH followed by cowl side trim board LH then instrument side panel LH and finally lower instrument panel finish panel sub-assembly LH. Vehicles with Power Tilt and Power Telescopic Steering Column require operations of the tilt and telescopic switch through full extension and column lowering before steering wheel right and left maneuvers can remove the 2 screws and 2 claws that enable the lower steering column cover's removal. Users who have Manual Tilt and Manual Telescopic Steering Column must extend and lower the steering column with the tilt and telescopic lever before removing the 2 screws and disengaging the 2 claws. Circumference removal of upper steering column cover starts with unclipping four clips and freeing the claw. To remove the wiper switch disconnect its 2 connectors then use a screwdriver to unwrap protective tape from the tip for unscrewing the assembly claw while avoiding rough force to prevent breaking the claw.