Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Toyota Sequoia Wiper Switch

Windshield Wiper Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

  • 2008 Toyota Sequoia Wiper Switch - 84652-0E011
    2008 Toyota Sequoia Wiper Switch Diagram - 84652-0E011
    View related parts

    2008 Toyota Sequoia Switch Assembly, Windshield Wiper (W/Relay, Wiper Control)

    Part Number: 84652-0E011
    $258.27 MSRP: $368.76
    You Save: $110.49 (30%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Switch, Windshield Wiper; Windshield Washer Switch
    • Part Name Code: 84650D
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 9.2 x 4.9 x 3.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 84652-0E011
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Sequoia Submodels:
    • Limited, Platinum, SR5 | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Wiper Switch

Looking for affordable OEM 2008 Toyota Sequoia Wiper Switch? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Wiper Switch. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Wiper Switch Parts Q&A

  • Q: How to install the windshield wiper switch assembly and related components on 2008 Toyota Sequoia?
    A: After engaging the claw you should begin with switching the wiper device and connecting the two corresponding wires. First install the upper steering column cover through 4 clips onto the instrument panel cluster finish panel while securing it with the claw. The 2 claws for installing the lower steering column cover should be activated first while avoiding contact with the tilt and telescopic switch before fastening the 2 screws during wheel turns to right and left. Next install the lower instrument panel finish panel sub-assembly LH followed by the instrument side panel LH and the cowl side trim board LH and conclude with installing the front door scuff plate LH.

Related 2008 Toyota Sequoia Parts

Alternate Year Models

+
2007 Toyota Sequoia Wiper Switch 2009 Toyota Sequoia Wiper Switch