Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Toyota Sequoia Steering Angle Sensor

Steering Column Angle Position Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

  • 2008 Toyota Sequoia Steering Angle Sensor - 89245-06040
    2008 Toyota Sequoia Steering Angle Sensor Diagram - 89245-06040
    View related parts

    2008 Toyota Sequoia Speed Sensor

    Part Number: 89245-06040
    $271.67 MSRP: $387.88
    You Save: $116.21 (30%)
    Ships in 1-3 Business Days
    Product Specifications
    • Other Name: Sensor, Steering; Steering Wheel Position Sensor; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Steering Sensor Assembly
    • Manufacturer Note: VSC-WITH
    • Replaces: 89245-33050
    • Part Name Code: 89245B
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 7.4 x 7.4 x 6.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 89245-06040
    • Warranty: This genuine part is guaranteed by Toyota's factory warranty.
    More Info
    Fits the following 2008 Toyota Sequoia Submodels:
    • Limited, Platinum, SR5 | 8 Cyl 4.6 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS

2008 Toyota Sequoia Steering Angle Sensor

Looking for affordable OEM 2008 Toyota Sequoia Steering Angle Sensor? Explore our comprehensive catalogue of genuine 2008 Toyota Sequoia Steering Angle Sensor. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2008 Toyota Sequoia Parts Questions & Experts Answers

  • Q: How to install the Steering Angle Sensor on 2008 Toyota Sequoia?
    A: Begin by matching the spiral cable pins with steering sensor installation holes before you fasten the 6 claws to maintain the spiral cable to the steering sensor. The installation order consists of installing the spiral cable sub-assembly and subsequently adding the upper steering column cover and the lower steering column cover. First normalize the spiral cable length and afterward mount the steering wheel assembly together with the steering pad. Next in sequence install the lower parts of steering wheel cover No. 3 and then the lower steering wheel cover No. 2. Make a cable connection to the negative battery terminal where torque should be set at 5.4 Nm (55 kgf-cm, 48 in-lbf). Failure to initialize the system might be necessary for specific systems following cable reconnection. Testing the SRS warning light forms the last step in this procedure.

Related 2008 Toyota Sequoia Parts

Alternate Year Models

+
2007 Toyota Sequoia Steering Angle Sensor 2009 Toyota Sequoia Steering Angle Sensor