How to install the Power Steering Pump and its related components on 2009 Toyota Sequoia?

Two bolts and a nut must be used to secure the vane pump assembly with torque set to 28 Nm (286 kgf-cm, 21 ft-lbf). Install a new gasket on the pressure feed tube before applying the union bolt which should reach a torque of 51 Nm (520 kgf-cm, 38 ft-lbf). Securely connect the solenoid valve connector joint with the oil pressure sensor connector joint. Fits the pump hose between the No. 1 oil reservoir and the clip to secure them. Install the V belt to the fan and generator and subsequently install the air cleaner with its attached hose. Before finishing the installation you must attach the throttle body cover sub-assembly together with the No. 1 engine under cover. The last step includes power steering fluid addition followed by power steering fluid bleeding while checking for fluid leaks.

OEM 2009 Toyota Sequoia Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

View related parts
2009 Toyota Sequoia Power Steering Pump
Part Number: 44310-0C110
$275.28 MSRP: $393.04
You Save: $117.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane; Pump
- Part Name Code: 44320
- Item Weight: 6.20 Pounds
- Item Dimensions: 13.1 x 10.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44310-0C110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, Nightshade, Platinum, SR5, TRD Pro, TRD Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Toyota Sequoia Power Steering Pump
Part Number: 44310-0C100
$346.69 MSRP: $495.00
You Save: $148.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Vane
- Part Name Code: 44320
- Item Weight: 6.10 Pounds
- Item Dimensions: 7.7 x 5.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 44310-0C100
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
More Info
Fits the following 2009 Toyota Sequoia Submodels:
- Limited, SR5 | 8 Cyl 4.7 L GAS

2009 Toyota Sequoia Power Steering Pump

Looking for affordable OEM 2009 Toyota Sequoia Power Steering Pump? Explore our comprehensive catalogue of genuine 2009 Toyota Sequoia Power Steering Pump. All our parts are covered by the manufacturer's warranty. Plus, our straightforward return policy and speedy delivery service ensure an unparalleled shopping experience. We look forward to your visit!

2009 Toyota Sequoia Parts Questions & Experts Answers

Q: How to install the Power Steering Pump and its related components on 2009 Toyota Sequoia?
A: Two bolts and a nut must be used to secure the vane pump assembly with torque set to 28 Nm (286 kgf-cm, 21 ft-lbf). Install a new gasket on the pressure feed tube before applying the union bolt which should reach a torque of 51 Nm (520 kgf-cm, 38 ft-lbf). Securely connect the solenoid valve connector joint with the oil pressure sensor connector joint. Fits the pump hose between the No. 1 oil reservoir and the clip to secure them. Install the V belt to the fan and generator and subsequently install the air cleaner with its attached hose. Before finishing the installation you must attach the throttle body cover sub-assembly together with the No. 1 engine under cover. The last step includes power steering fluid addition followed by power steering fluid bleeding while checking for fluid leaks.

Related 2009 Toyota Sequoia Parts

Alternate Year Models

2008 Toyota Sequoia Power Steering Pump 2010 Toyota Sequoia Power Steering Pump